Posts by dennis markum

aussie ... Sager USA sent me the number for CLEVO in the UK and I drove out to their shop with my 8890 which is a CLEVO 800P. Because the power supply is part of the motherboard, they replaced the entire motherboard which is consistent...

I just had the same experience. My 8890 was working properly when it suddenly died as there is a malfunction between the brick and the LEDs on the computer. The green light on the brick is on but the LEDs are off. Initial...

I am in London and my 8890 just died while the AC adapter was plugged in. Battery (4 months old) is now drained and there is no power to the notebook. The green light on the BRICK (ac adapter) is on but there are no lights on the...

I recently purchased a 7230 Blackberry and installed the software in order to syc with Outlook. The laptop recognizes the Blackberry when plugged into a USB port, but the blackberry software will not connect to the hardware. I tested...

I searched some other threads and one suggested trying winDVD4 because of encoding issues with other players. Voila, it worked. Thanks for your response and comments.

When I insert a DVD movie in the drive it will not boot. When I open a player (eg NERO SHOWTIME) the drive churns away but will nothing happens. Any suggestions?

For capturing analogue video (Hi8, VHS) I would recommend using the Canopus ADVC-100 (little black box). I have used one for a couple of years without a problem, and now find it invaluable. Once you hook up your little black box...

The Sager rep mentioned that my description sounded similar to two previous instances that he was aware of. He assumed that the sound was coming from the hard drive, but could not be positive without inspecting them.

The problem: When I powered up after the traumatic experience (internal screaming noise), there appeared a black screen with a flashing message...."problem detected with array1". That screen changed a few seconds later to...

Aussie After working with a helpful senior techie at Sager, we deleted the problem RAID array and configured a new array (same RAID 0). Unbelieveable!! Windows booted up and all data was intact. I took your advice and installed...