New Posts  All Forums:

Posts by egalus

Quote: Originally Posted by donnyyeo I have updated to version A09. No problems yet. This version has optimized the battery charging alogrithm... the batteries will live longer now. Worth it. This largly...
Maybe this thread is of some help for you too: http://www.notebookforums.com/showth...um-m+celeron-m
AFAIK all m7xx p-ms are socket 479m compatible and should be pincompatible with your 9300.
Quote: Originally Posted by Sam Ontario See the Intel Link below: http://processorfinder.intel.com/scr...sp?sspec=sl7eg Its a Dothan (Pentium M) with 478 pins! Most Dothans if not all are 478...
Cause you probably set the power button to "Stand By" or "Suspend" and not to "shut down".
How much power did your LEDs consume?
Not to mention that top of the noth p-m is almost same lvl as the extreme edition of the p4 regarding performance. Regarding power consumption p4 just is the best intel could produce for the energy industry - wasting as much energy as...
Quote: Originally Posted by HardBall I would suggest that you hold off on trying to change the CPU. There is very little benefit going from Celeron M to PM, with the biggest difference being EIST; which will save you...
That there are not banias with 533FSB does not mean that they can't run at 533 FSB. As the mainboard is responsible for creating the FSB it's the same as with the Dothans, as long as they work stable when overclocked they should work the...
Quote: Originally Posted by DELL-Machina the PentiumM MUST be a Dothans CPU running at 400Mhz Bus. The wire is common and can be stripped out of any appliance such as a lamp or a phone charger and such. Are you...
New Posts  All Forums: