Posts by kondlao

Wow! 3:30 is great, I wouldn't like it if my screen dimmed down more then a few notch. I always leave mine plug in 90% of the time. According to Catalyst, my video card is listed below: Graphics Card ManufacturerPowered by...

Quote: Originally Posted by jabba2 Yes they both are enabled looking at CBI. I have now gone up to 76 C with the browser and IM programs running lol. I hope your heatsink seated properly. And don't over...

Congrat on the lower operating volts and temp. I bet if you were on battery, it'll be almost twice as long on normal use.

Yeah, that is way too hot. I thought mine was hot at 60c with full load. But the fan is on so it keeps things cool. My so call "heat problem" is not from the CPU itself perse', but from the chipset. Since there's only a...

Thanks ThunderPC.... RMClock work but not very well on mine. Would be very nice if I can get the voltage down that low and remain operating. I went back to AMD driver... I was a good experience....

Quote: Originally Posted by visionaryuser I got the following P-state settings rockstable on a Mobile Athlon64 3000 Clawhammer Revision SH_CG (is the 62W model I s'pose, right?): 4x 0.8V 5x 0.85V 6x 0.925V 7x...

If BIOS flash is bad, it is possible to remove the BIOS chip from the board and insert into a a running PC and reflash it using Winflash to any BIOS and Mfg you want. As long as the BIOS chip can be remove from the board, which the ones...

Thanks qhn, this is my 2nd time around with MCE install. I install the latest driver from ATI and it prompt me to uninstall the driver that I have first and install just a compatible driver on it then reinstall the latest driver that I...

I just install MCE 2005 on my M6805. When I initialize the MCE interface, I got a msg saying that my video driver is missing or not compatible. Once I click on OK, the msg goes away and the interface load. Every thing look to be normal...