Posts by ShortBus

Howdy all, I'll start with what I need: WTB: I'm looking for some old memory for an older laptop. I'd like to get two 256Meg sticks of PC100 laptop memory. If you've got some, let me know and we can work out a deal. I also need...

Howdy, I don't want to hijack this thread, but I do have a question that doesn't relate to the original question. I just started to play FS2004 because I need to learn about the comm system used in airplanes and get a pilots point of...

What's the most annoying about ESPNMotion is that when you go to ESPN.com, it just starts running all on its own. Better hope you have your speakers turned down or headphones plugged in.

Quote: Originally Posted by spiderkhan I ate some bad Chinese last night and I put a lot of brown magic in the toilet. Now this is both brown and bubbly.

Do you think the magic is both brown and bubbly?

Quote: Originally Posted by flick Answered while I was typing. What will the 3.3v supply? Is that for the FSB or the chipset or what? The 3.3 Volts will supply the FS_B pin. Doing this will make this input a...

After looking at the timing diagrams, the IC expects the FS_A, FS_B, and FS_C pins to be either 0 or 1 at a particular point in time. From looking at the diagrams, this is in the millisecond range and I would expect late timing to make...

You still need to connect pin 12 to pin 16 to supply the 3.3 VDC.

Quote: Originally Posted by KraxKill Thanks for the info ShortBus i'm at work right now but what you said makes sense. Pin 16 seems to not go anywhere thats the thing it just hits the board and stops after short...

I took a look at the data sheet. The FS_C and FS_B pins are either tied to ground or open. You need to know which before modding it. With everything turned off, you can check the FS_B pin with an Ohmeter to ground. If it's tied to...