Posts by Kevlarman

Did you remove the CDROM and screws for the bluetooth module?

Yep. The 9300's DVI is digital only. You'll need to use VGA or S-VHS if you want analog.

The DVI-VGA adapters that come with most video cards are made for DVI-I connectors (digital and analog). DVI-I connectors have four pins that surround that lone pin on the right side. The connector on the back of the 9300 is DVI-D,...

You need to type: nvflash 445C1250.ROM

The only way to change the clocks so that they stick is to flash the videocard BIOS: http://www.notebookforums.com/showthread.php?t=117648

When I first opened up my laptop (to install the 7800), I fond the philips screws to be a bit tight, and my small screwdrivers would slip out. Afraid of stripping the screws, I used my Leatherman Squirt to loosen the screws. It has...

I had the same problem with the program not reading my GPU temps after the XPS2 BIOS flash. The solution is to just renable the GPU temp monitoring in one of the program settings. You don't have to uninstall or reinstall...

Quote: Originally Posted by Penguin1257 Doesn't AS5 have better thermal properties...? AS5 Thermal Conductance: >350,000W/m2 °C (0.001 inch layer) Thermal Resistance: <0.0045°C-in2/Watt (0.001 inch...

Huh? Ceramique is quite a bit easier to remove than AS5. Don't be a nut and mix it with the adhesive, and you'll have no problems. :]

Yeah, don't drop it on your foot. :P It's considerably heavier than the stock 90W adapter.