New Posts  All Forums:

Posts by uuwuu

his underlying issue is in WoW. He just noticed the artifacts during boot while experimenting. I assumed there were also artifacts in wow, but it could just be bluescreens... But anyhow, a digital camera would get the job done...
Though I was using the unlocked bios for the 7800gtx, I had some stability issues. I would try making a set of bios for the clocks you're happy with, flash to it and see if it helps. also, the fpu temp gauge only measures temp of the...
no problem. I think that the thread should have remained where it was, since I've only seen the issue in dell i9300 and xps2/170s, though I generally avoid the other threads, so I could be wrong.
http://www.notebookforums.com/thread182622.html disable nvidia display driver service or switch drivers.
this is kind of out there, but here it goes.. so a while back, when I was overclocking my 7800gtx for the first time, I was pushing it and using the fear stress test. Once about every three runs, system would lock up, then either shut...
yea. stop that service, then right click, go to properties and disable as well.
I just got a WD1600BEVS. 160GB western digital at 5400rpm. So far so good. seems fast enough and plenty of space. My only complaint is that it seems to be a little more power hungry than my previous hitatchi drive. I am happy with my...
I just got a WD1600BEVS. 160GB western digital at 5400rpm. So far so good. seems fast enough and plenty of space. My only complaint is that it seems to be a little more power hungry than my previous hitatchi drive. I am happy with my...
There's some kind of bug in some of the newer driver sets that cause the system to report the ram speed as twice what it really is. I suspect that your situation is related to this.. sorry to bring the rain.. What video card do you...
one more thing.. I think my fans were only 5-6volt or something, so that may be why it worked so well.. Knowing very little about electrical engineering, I would expect that your fans may pull too much power, but it should still work,...
New Posts  All Forums: