Posts by t024484

Quote: Originally Posted by manbot that's what i'm otrying to do, i'm booting nvflash and all the other roms. but the boot process stops at "unpacking atapi..." You must be doing something...

Quote: Originally Posted by manbot ok, so i'm trying to fix the clock speeds on my 7800gtx back up to stock settings because they are below the norm. i have already created the premade .rom files on an .iso disk, from...

Quote: Originally Posted by the_scotsman I only just got my 9400 about a week ago, and it came with the A03 BIOS. I flashed the A04 BIOS that was posted on here recently, but I would like to go back to the Official...

Quote: Originally Posted by HomerJ Look at the motherboard around the connector area. There's a ton of missing components all over. It's not just a bios setting. It's more than that. (I have both motherboards and...

Quote: Originally Posted by anfo Well, UPS is scheduled to come pick up the 1400. The card would have fit if the LCD video connector from the 950 was stick up 1/2 inch off the board. Everything lined up proerly etc but...

Quote: Originally Posted by Elif Tymes Updated some info! Thanks guys! keep it coming! I had the 6800 Go in my 9400 laptop working fine for almost two months until I could get a 7900 GS through Ebay. All that...

Quote: Originally Posted by nastynas Ok this is a follow up. A dell tech came to replace the 7900 gs on my intergrated motherboard. He opened the laptop and could not install the card. There is a peace that sticks up...

Quote: Originally Posted by cyl2q I have a E1705 with a 7800Go and I can't OC over 360/900 without artifacts. Could anyone please tell me how to change the volt to 1.2 ? Thanks a lot More volts means more...

Quote: Originally Posted by pinko I've been doing some testing with a few differnt drivers, the results arnt to comprehensive because I'm not particularly patient, I've found the ceiling for my card at 1.1 volts, but...

Quote: Originally Posted by pinko I just got a 1705 with 667mhz ddr2, according to cpu-z the memory is only running at 333mhz so I dont think there would be any differnce. However there is speculation that the 64bit...