Posts by erek

http://www.youtube.com/watch?v=DikLV08M3OA

have you considered looking at the Extreme Pinmodding Guide? i am actually using some voltage to get my p-m stable (Since 2005): http://www.notebookforums.com/thread114523.html

found my answer... the samsung is from an E1705, and requires the inverter board to be swapped with the I9300's LCD for it to work properly, http://notebooks.bigresource.com/Del...-2fZJnYrG.html

is it Okay to use the power inverter from the LG Philips 17.0" 1440x900 display with the Samsung 17.0" 1920x1200 display?

are there any true 8-bit LCD panels for the Inspiron 9300? was wondering if "Part # GH874 Liquid Crystal Display, 17", WU VESA, GLARE WIDE VIEWING ANGLE..., Samsung, V2" is 8-bit or 6-bit dithered? thank you..

Quote: Originally Posted by ataxy advanced-- temperature compensation cpu temp. offset 2c gpu temp. offset 10c is that to say that i8kfangui is off by 10 degrees celsius? 38C reported by i8kfangui is...

here's to another success story with oven baking 385f for 9minutes: GeForce Go 7800 GTX

Quote: Originally Posted by powerpack Scotch tape? Really scotch tape does not catch anyones eye? Is electrical tape that expensive. I don't see scotch tape holding up well in there. I see hard useless varnish on some...

Link: 2.5" SATA Hard Drive to IDE 44 Pin Adapter For Laptop Drives Will this work in an Inspiron 9300, or Latitude D600 (in-general any laptop?)

Go 7950 GTX I see what you mean... by wind tunnel strips on the GPU's heatsink fins