Posts by lollavid1

how can i check if my t7400 is running at top speed now? I know that i8kfangui has a measure (4 actually), or rightmark (would I have to update that from when I was using it with A01?)

i pm'ed you a while back... no response though.

I actually wanted to try and compare 32- and 54-bit RC-1 Vista. I d'led both and burned to disk. My 32 bit disk works fine, but it won't let me install the 64-bit version... anyone else have problems? I have a T7400 ES so it should...

Thanks for the help. Even when I do this with RM Clock Utility and run Max settings, shouldn't it ALWAYS be at 2.16 ghz? Because it's not. Also, my max voltage (VID) is 1.250, not 1.325 finally, I was doing as told regardless, and...

It took 1 min. 41 seconds (20 iterations). But I had Rightmark on and I saw the cpu clock at 2.16ghz I also have azureus running... don't know, this is a far cry from 1 minute...

From a new thread I posted- please help out: Just installed my t7400 and CPU-Z is showing: Core speed: 997.5 Mhz Multiplier: X 6.0 also Bus Speed:166.2 Mhz Rated FSB: 665Mhz I saw a post by rDigital in the 7900gs...

I am plugged into the wall and that is the speed I'm getting. I saw a post by rDigital in the 7900gs overclock thread about using Rightmark CPU Clock Utility and that is showing the same speed.

Just installed mine and CPU-Z is showing: Core speed: 997.5 Mhz Multiplier: X 6.0 also Bus Speed:166.2 Mhz Rated FSB: 665Mhz does this sound right?

got it- the black thing flips up. terrible pic though on dell.

I am in the midst of swapping gpus and need to remove the keyboard ribbon. Dell's instructions say," To disconnect the keyboard cable from the keyboard connector on the system board, rotate the keyboard connector latch toward the...