Posts by mykalt45

Hey Guys, anyone know if there is a way in NHC to use a 17x multiplier? I have a 1.8 Mhz running at 2.13 stable, but if I use a 17x multiplier I could get a 2.23 CPU speed. I was wondering if anyone knows if this is possible.

Quote: Originally Posted by Mr. K6 Do you know what your stock voltage is? I'm guessing its 1.340V (most are), so ground VID2 (connect pins F3 and F4) and VID0 (E2 and E3) to get 1.420V. That'll get you into Windows,...

Mr. K6, I have a few questions I hope you can answer. I have read the volt mod thread, but I am a little confused. I pin-modded my 745, and after I turn it on, it freezes at the welcome screen. I disabled speed-step in setup, can now...

doing the voltmod on V2 and V0 got me booted into windows with no hiccups at 2.4 Mhz. I ran prime95 torture test, and I got the following error after Test 2: Test 64000 Lucas Iterations M19922945 and 945 using 1024K FTT Length Fatal...

Quote: Originally Posted by ziddey That's a bit of a tough situation. No doubt you did the pinmod properly. But if you're having troubles booting due to instabilities, I don't know what to say short of a physical...

Hey Guys, I need some help bad. I did the pin-mod, 1.8->2.4, and when I got it all together it booted up, and the first thing I noticed was that the screen was really light, then it did not make it past the welcome screen. I restarted...

Hey guys, I am hoping that someone can help give me some insight on overclocking. I have the nVidia 6800 Ultra in my i9300, and I can use nVidia's software to OC, but as I have been looking on the forums, I see people with way higher...

Quote: Originally Posted by Alexz Just wondering around... I see many posts here and on other laptop-related forums from a prospective college students inquiring "which laptop for college"...suhc as owing...

Hey guys, does anyone if you can do something with the cooling of the notebook, or is it pretty much just stock fans and Arctic Silver 5 as the only cooling options? Thanks. My stock temps right now with I8kfangui is 40 C for CPU. normal...

OhSoCheesy, Thanks for the quick post. I notice you're from Dallas. I am too, but I am moving to Maryland in a few weeks. I will miss Dallas!