Posts by bio9628007

1. Brand of SSD I'm considering: I have considered OCZ, but I have read some negative reports. Finally I choose Corsair. Actually, I only care the high end control chip. 2. What am I looking for: Performance, that is speed not labeled...

Sony SZ comes with built-in camera and microphone. When I installed vista 5600/5728, I found that the driver of camera for xp can be used in vista. But I did not find any unrecognized hardware in device manager of vista for...

After installing RC1, I cannot adjust the LCD brightness any more. Even in the mobility options in control panel, I still did not find any available option. But I saw some pics on the web that there is a brightness adjustment option in...

I have installed Vista RC1. Two major drivers needed: The mic doesnot work, although the wecam can work with xp driver. The integrated ms duo card reader cannot work. Any solution?

when under Winxp, with driver from sony website. it says it has 128M video memory. But when today I installed vista 5600 RC1, it reported that it has 64M dedicate memory and can share maximally 256M system memory. Window Aero need at...

I called the Sony support. The give me a link http://www.iq.sony.com/srvs/autoresponse.asp?id=412894 In my understanding, this system support 667MHz FSB (both CPU and mainboard), so I think if I choose DDR2-667 instead of DDR2-533...

I want to upgrade my SZ 160 to experience the preRC1 of Vista. I ordered two of kingston, with model: KVR667D2S51G from upgrade.com/ But they write back to me and ask me to check whether this memory is compatible with my system. I...

Thank you for your help. It can stop responding at any situation. The most recent 3 times when it stops: 1. I close the lid and take a rest, when came back, it stop responding.(My setting is : when close the lid, do nothing.) 2....

My SZ 160P/c occasionally stop reponding but show no BSOD. And the only thing I can do is to press power button. After restarting, no recording relating to this problem in the event view. I recover the whole system and the problem is...

When I unplug the AC power of my SZ 160P/C, it goes to battery mode so the LCD brightness decreases. But when I plug the AC power again, the LCD screen brigtness still remains low and even after I manually turn it into brightest, it...