Posts by Malkaven

Copper transfers heat WAY better than alum. The post is about everything we did to get our temps real low. I did not apply the as5 wrong. It really isnt rocket science on how to apply thermal paste. I'm very computer savy and iver...

No Skillz, heat will rise. The liquid pro is in direct contact of the CPU. then a COPPER block on top of the liquid pro. technically the copper block is the new heat sink the alum one is only really used because we needed to secure...

For this thread, you would use liquid pro on the CPU not AS5. Put the liquid pro exactly where u would normal use as5. NOT on the green areas of the CPU.

maybe cause we both did it at the same time with each other. same system same results. Also this is maybe the reason y we havent posted before=p

Wow dude. who pissed in your wheaties? Just research into it. Its only like 14 dollars. Im just saying it worked for me. Anyone else w/ high temps id recommend it. Im sure the copper block helped alot dropping the temps too

No I did not use AS5. I used http://www.frozencpu.com/thr-26.html as mentioned in the article. Apply this stuff very carefully on the CPU then place the copper block on the CPU. Make sure the copper is completely covered by the...

No I added a small copper peice. The copper peice was against the liquid pro and the alum heat sink held everything in place.

I PM my 9300 from 1.8>2.4 as well. Also went from 400 to 533 fsb at 1.212V. I also upgraded my video to a 7800. My idle temps ranged from 30-35ish. Load temps are what matter. Load I reached up to 80-85c with just normal AS5. ...