Posts by Sau

hi miller, To simply answer your question, no you don't get a headache from watching a 60Hz LCD than from a 60Hz CRT. This is because the two screen technologies operate totally differently. With a CRT screen, an electron gun...

Yes I totally agree with your comments Gary. However, right this moment I'm having trouble staying cool as it is... so I don't fancy putting the heating on just to test this scenario. I am however also thinking of getting a cooling pad...

Hi all, thanks for all your comments. My reasons for opening this thread was too try and collate some information regarding using RAID 0 on the 8790. I think I've decided that I shall put them in a RAID config. I've downloaded...

Hi All, This is mainly aimed at all those with 2x 7200rpm RAID-0 setup. I've only just recently added a 2nd 60Gb drive in my 8790. My concern is regarding the reliability of these drives. I've not setup my machine with RAID-0 yet,...

I'll second mr G. there. As advised set to 128Mb and forget about it.

Doesn't your Sager get a 'little' bit hot?

Have you done any form of o/cing before? Because if you have, you would know that most of the time, heat is your main concern. Looking at the CPU that you have opted for (the so called 'Pres-Hot' chip) I would advise against oc'ing...

I've cleared up all my problems with the RAM business. Apparently I've been given a non-matched pair of RAM and so they weren't running at the correct speed. I did a RAM swap with the company and now my machine is also running with...

I'd agree with G, if you really hate the boot up time that much, ever thought of using hibernation instead? The machine would wake up in about 20 seconds, but it seems that maybe 20 seconds is abit too long to wait for...

If you just want the fan to be on, but not the full blow variety. You can always try to restrict the airflow by 1/2 covering the fans at the bottom of the machine. This way the cooling will be inefficient enough to cool the system down...