Posts by debaucher

Isopropyl will evaporate quite quickly as it is alcohol (and pure/clean alcohol at that) Since you had the 91% Isopropyl that means 9% is water thus some drying time is needed. It is best to use 99% Isopropyl as spillage leaves almost...

Quote: Originally Posted by goffer It says dell corporation on the back but not the typical dell logo... it seems to be doing the trick right now anyway and if it does harm to my hardware in some way I have...

Yea, this is not a genuine dell part. It is a 'compatible replacement' as steverino pointed out. You may want to buy a new genuine dell part as non-OEM power supplies are iffy at best D.

Quote: Originally Posted by Weaser I was having the same issue with corrupted windows opening and such. I just upped the 2D settings and walla.. problem solved. Kudos to whoever found the solution. Your...

thearod, by setting your 2D clocks to 100/121 you fixed the bandwidth issue (the memory is running at a faster clock and therefore is able to handle the bandwidth needed). The inf tweak is just another way to fix the bandwidth issue...

Yea, I personally feel the bios flash with an unlocked bios and even the 2D clocks adjusted is the best choice. This way, you can adjust the 2D (and 3D) with software and the problem is gone. But, if you are afraid to flash your vid...

Yes, I believe so. The inf setting is "bandwidth factor" In the modded inf I believe it is set to 5 which will make your card run 2D mode at 3D low power mode frequencies. I find that I add extra battery life to my notebook...

thearod, your problem is a well known one (at least on LV2GO) I came up with the fix for it. Basically, when your system goes into 2D mode your vid card memory does not have enough bandwidth to support your resolution. So, you need to...

Hey pieter, Just noticed the router you linked to. I have been waiting for the DIR-855 (as you know) but this one caught my attention. If I can find a seller (that also ships to Japan) I may just purchase this one. D.

I have no idea about that stuff, but if it works for you then your fine. I personally change my thermal paste 2x a year so next time you change yours, just check the condition of it (if it is all dried up you will either need to change...