Posts by G-Omaha

I think that it is a Promise Controller. You may be real hard pressed to get it backed up - that's the bad thing about RAID-0.

I'm still using the moblie drivers available at the ATI site.

What speed are you using and which wireless unit? IF you are using the "Turbo" mode - you can ALWAYS expect problems because of it's architecture and the likelyhood of interference for "outside" sources on wither of...

Mostly due to over-driving the RAM speed to a speed that is not really very compatable with the GPU speed. The setting must match to avoid problems and the Sager/Clevo defaults ARE NOT the best settings for the unit. Most times,...

You might have to play with it a litle bit to set the speed to the optimum value for you machine. That should work as a start.

Try EUROCOM

Have you cleaned out the heat pipes recently?

WSXGA @ 1280x800??? That is something that you may have real problems finding in a Wide Screen Laptop. I think that is 4x3 resolution and is not a widescreen 16x10 resolution. The WXGA is very readable - you need to "check it...

So... you are saying that you did not have it "turned on"....???

And.... what type of Sager is a "G5"? OR...which Sager do you have??