Posts by ataxy

well there is a good chance from you are saying that its a falling gpu, contrarily to often talked about baking most of the people that i heard speaking about those white screen are due to failling gpu and not the solder so you could...

yep definitly want to see what this look like

Quote: Originally Posted by qhn Nothing happens with an external either? cheers ... yep i second that have you tried an external monitor

well ounce in the bios, i think the option is ''set time and date'' so just go and set the time and date it will be written on the screen which button to use. edit: here is the way to do it power on --> f2 --> system -->...

did you set back your time and date in the bios after putting it back together? That would probably solve a) and maybe even b) and c)

Quote: Originally Posted by matchbox2022 I've given it an extra fan and a copper shim that sticks out onto a copper radiator in the notebook where the fan pulls air through. As5ed of course. Would you post...

the amount of paste should be just enough to put a thin layer over the die, no more then the thickness of an hair as its only there to fill in the irregularity of the mating surface in order to optimize heat transfer from one surface to...

raising the voltage on the 7950gtx in my point of view could prove to be an instant killer without proper cooling which the m1710 does not have

disturbance across the screen!? also is you gpu on board or dedicated? paste should also be applied on the gpu if you disassemble it also to much paste is as bad as too little. noisy fan can be caused by either been seated improperly...

do not forget the bbq sauce it gives spicy graphic