New Posts  All Forums:

Posts by NovaShine

The HK plug is idential to the UK plug in most cases. We use the big 3 prong ones officially, though for some reason, those two prong ones, 3 round prong plugs etc. are floating around...
owch... Man, maybe ill start calling BenQ and ask them about my support before i start work... I would really love to apply some AS5 inn there on top of cleaning the sinks. Anyway, the Undervolt was quite successful. im getting full...
Sweet, i just tried that. Lowered vCore to 1.004v on 15x and im getting load temps of 64 celcius now according to mobile metre. So far it's survived 6hrs of Prime95. Will continue to stabilty test it. Edit: Managed to lower Vcore to...
Actually im not sure if it's clogged or not, but i put my money on clogged vents cuz when this was new, the bottom is usually barely warm. For undervolting, can anyone tell me how? The bios on this notebook gives me absolutely no...
Well, i got a BenQ Joybook 7000 a while ago. I was generally using it for word processing, excel spreadsheets etc until now. I had to move to Hong Kong for a few months and my main PC is in Australia, so i can only game on my...
The biggest mistake of people new to installing motherboards is forgetting to ground the board with the brass standoffs. At the attatch points of the motherboard to the case where you put the screw through, you cant just put the screw...
yes, it's true that the quattro cards and firegl cards use the same boards as their gaming designs. In fact, to get one of these cards, you only need to do a quick hardmod (solder a wire or two) and flash the bios and you have a firegl...
and Asus boards are notorius for under-reading the software probe, thus giving a lower than actual figure. I slipped a probe under my CPU and i found there was a 12 celcius difference between the software probe and the hardware probe....
Quote: Originally Posted by CrabbyPatty In fact it already crashed once to the point I had to reformat and reinstall everything hard drive corruption due to overclocking is a prime symptom of your ram not...
Corsair ValueRam is actually some pretty decent ram for a budget computer, depending if ur lucky or not and got some decent chips in it. To overclock stably i would first turn off Asus's AI crap and then look at 2 things: 1. PCI...
New Posts  All Forums: