Posts by openmind

Try www.svideotorca.com. I believe the RCA to S-video dongle is about $25.00. NB: Since you are inputting video from RCA to your S-video in port, you need the RCA to S-video dongle. Click on the S-video to RCA tab on the left of the home...

robertpb -- yep, thru the S-video-in and line-in ports

www.omegacorner.com

That's what happened to me at first, too. I then read the Foolproof Uninstall/Install method thread on the Rage3d forum in the Radeon Drivers and Catalyst Discussion subfolder (sorry for the long-winded address!) and followed all their...

I installed the drivers on a NP8886, 2.8 GHz,with a 64MB M9 Radeon. During installation, there is an option for choosing 4 additional utiliities to install (one of which is the RadClocker).

I'm hoping the clocking enthusiasts can clear up some confusion. I recently installed the latest Omega Drivers based on Cat 3.6. In the control panel that is now installed, there is a Clocking Rate tab in the left-hand side of one of the...

itburch - It might be more productive for you and the people you know who have similar performance and power requirements as yours to write in directly to the computer makers (Sager, Dell, Toshiba, Sony, Alienware(!) etc) outlining your...

I use Cyberlink PowerVCRII 3.0 with Aux unmuted for Playback and Aux selected for Recording. (I uninstalled Aver TV Studio before installing PowerVCR.) However, some people have reported a problem with this software when hyperthreading...

Double-click the Volume icon in the systray at the lower right corner of your screen ( the one that looks like a megaphone). If the playback options are muted, uncheck them one by one and see which one restores the audio. Then click on...

My bad ... not familiar with the Tivo . The cable shown in your original link would be ideal.