Posts by zzpulp

Plain and simple, DisplayPort is better. I know its annoying to switch but yeah. Anyway, you aren't gonna see HDMI to Display Port adapter because they are not 1-1 compatible. DisplayPort can send an HDMI signal (and thus DVI) but the...

You definitely shouldn't have been running your GPU without a fan. I understand you wanted the fan to get replaced but say this GPU lasts until your warranty runs out. You just stressed the hell out of your GPU and you'll probably have...

Yeah I should've mentioned its not really feasible to just hook an amplifier to a device you have no info on.

I guess I'll get to it once I get back home or sometime this week.

Seems like an amplifier between the inverter and the LCD could yield a working solution. However, I do not know the exact details of how LCD's are powered and this mod is probably pretty challenging. Anyway, I have both the 3600M and...

The only cards you can use are the ATI X300, X600, Nvidia 6800 go, 6800 go ultra, 7800 go GTX. There are a few quadro equivalents for the nvidia cards. Anyway, you can't use a 79xx or any 8 series or higher GPU.

I've also heard of the 5300 not working. Definitely give the 4965 a go instead if you are only considering the two. As for win7 support, I imagine it would be supported; its a popular card.

Both my 7950 GTX and my FX3600M are running just fine. I imagine the 6800 ultra I sold a long time ago works fine too. Anyway, someone really needs to type up a compatibility list thread already. These questions are asked over and over.

Just because Santa Rosa runs at 800 MHz does not mean it cannot accept a higher fsb cpu. It just means the cpu's fsb will be forced to run at the fsb of the motherboard. This is not recommended though since the voltages may be different.

There is a small tab on the 9400/M1710 screens that is not on the XPS2/9300 screens. It would require a small case mod in order to fit physically onto the laptop. Beyond that, it should work but you may have to put your original lcd...