Posts by zzpulp

I'd just like to restate the all reasons for bios flashing in posts 1 and 4 are invalid. Next gen video support however is a valid reason. The thing is, all a bios hacker would have to do (hopefully) is identify the list of supported...

Uh, sorry I just saw all your posts. I do not know much about ATI driver modification but it sounds like its definitely a driver problem. On the positive side, at least it recognizes your laptop as 16:10. I'd try to find some older...

It all depends on how much extra room you have inside your hard drive caddy for your particular system. Thinking off the top of my head, there would definitely be some modification necessary to the HD caddy for this to work on a 9300...

I don't see why you need tape at all if you're using aluminum foil. Foil is already "adhesive" by nature and it won't have the room to wiggle around in there once you put the palmrest back on. Lastly, I just wanted to say...

Its something that even Dell acknowledges, they're just too cheap to do anything significant about it. They, by default, put the wind tunnel strip on the GPU's heatsink fins. This is only on newer dualpipe heatsinks though I believe:...

Quote: Originally Posted by neoson EDIT: Found the forum I read, seems to be referring to the GTX, not GS so I should be fine, but for your reading I'll post the link. ...

The newer cards won't even physically fit. The bios is the first thing thats run on your PC. Therefore it has to know how to properly set everything up so that it works later. You can think of this as putting everything into a proper...

Yes I made this guide in like 5 minutes. Asterisks just mean I need to add more information. The amount of asterisks just refer to the specific "problem".

Nope, I've never heard of that. I know that the EEPROM on the video cards only hold 64KB though. Since you are trying to flash another card's rom onto your card you will have to use the force flashing switches when flashing (ex....

I don't think anyone has the ISO anymore. I suppose it wouldn't take too long to make them all over from scratch. I'll have to locate the program I made to do these batch jobs or make the program all over myself. Mind you, I am doing...