New Posts  All Forums:

Posts by Stevew

I have to dv9000t I purchased it with one 100G 7200rpm drive. I also purcchased the hard drive caddy (very important, as it has the proper connection to the motherboard). I then purchased a 160gb 2.5" sata drive from Newegg. It...
Things have been going fairly well with my ML-44 and 2.04a bios. You can definately count me in the "it works" column. The only problem I have been having is an occasional lockup when at near idle. It looks like it might...
I was writing up a post last night about how well this machine has been working since the upgrade. The forum was down, so I left the machine overnight, and it was hung when I got back to it this morning. . Lets try agian shall we? I...
Thanks MS. That is very valuable info. I made some tweaks from what you posted. I really like RMClock. It will be interesting to see if others that upgrade to an ML-44 have the same lack of throttling, and have to use RMClock. I...
Quote: Originally Posted by msantos May I sugest you check the following? See if your power options (Control panel) settings are set to portable/laptop. If thery are not then the CPU will not throttle. I actually have...
I figured out why the processor was so hot. The cool and quiet is not working. The frequency and voltage never drop. I checked and the power profile is portable/laptop. I re-installed the via chipset and agp drivers, and the amd...
Thanks for the links. I just checked my CPU temp, and it is 54-56c at idle. 56c gives the slightly higher fan. Too hot. I will be taking the heat sink off again and checking it. This time I won't use kleenex. First, I am going to...
Success I have the ML-44 installed with the 2.04a bios. It's working well. Many thanks to msantos. The fan is much slower than it was, although still throttles up and down when idle. I am going to have to pull the heat sink off...
My ML-44 has arrived! I am going to do some benchmarks of things I use before I install it. Msantos. I am really sorry to ask, but I never got the email. I hope you got the new email addr. I sent. It is crazy that it isn't...
My ML-44 arrives tomorrow! Wooot!!! Msantos, are you still there? I have PM'd you a few times (sorry). I don't know what is wrong.
New Posts  All Forums: