Quote:
Originally Posted by Mr. K6
Well, I've discovered that ATi Tool is a little artifact happy . My card is actually good up to 470/1300 before it gets artifacts in 3DMark05. My highest score yet is 7950, and I'm...
Yesterday I had a look to the PLL used in my XPS motherboard: It´s a Cypress CY28411...
Up to now I know no program like setfsb / similar to overclock it...
Atitool tells you if an artifact occurs. 3Dmark200X does not tell you. Therefore you have to look yourself for artifacts.
In 3Dmurks2005 I never saw any artifact up to 495MHz.
It seems that Atitool is a lot of stressing more...
Back...
Quote:
Originally Posted by RoninCS
I've created some more bios ROMS to test with. I let ATiTool run for about an hour without errors, so I'm moving on.
I've done all the way up to 525/1450, and I'm going to trial...
Now I tried Atitool for a longer time. It seems to be a really hard benchmark. After 15 minutes of work I got temperatures about 80°C.
After 12 minutes of work at 450/1250 I get first artifacts, then increasing in invariably shorter...
I tried ATI tool up to now with 450/1250 only.
There were no artifacts after 10 minutes... then I stopped it.
I will try it and post the results.
I have installed a 1,8Ghz-CPU modded to 2,4GHz.
Juergen
Quote:
Originally Posted by prona
PCI Locks are implemented only through hardware. A simple BIOS flash or hack won't get you a lock.
There you are right... it is the chipset which is cause for this lock.
The...
