Posts by tyger23

2.5 or 2.6 should work. Stay away from anything else.

For dual channel to work, the memory has to be of the same size and same technology. You can mix manufacturers, but I wouldn't recommend it. When I say same technology, I mean that the both sticks have to be either x8 or x16 in both...

I believe Geed is correct. Did you break the "electronic seal" that comes up when you first boot the computer? It's a Dell based program that shows a EULA and your system service ID. If you did not break this, then you...

Actually, the 9100 will always come with two dimms. The 9100 and XPS use DUAL CHANNEL memory. What this does is causes the chipset to use both DIMMS as a 64-bit wide memory bus rather than a 32-bit wide single channel bus. This means...

Mine will flicker badly when I accidently hit the CAPSLOCK key. Quickset kicks in and displays a message that CAPSLOCK is ON. Annoys the crap out of me. Could this be your issue?

Oh, you'll need to download a different LOM driver for the XPS to get it to work on your 9100 HDD.

The 9100 HD will go into an XPS just fine. The drivers will re-enumerate, but this is no biggie. When you get the replacement 9100 from Dell, just swap the current HDD into the new system and off you go. Ship the old system back with...

I believe the 1066FSB will only be available in the LGA775 socket, not the current XPS Socket N.

No chance of this one. The 9100/XPS uses a proprietary form factor and it seems only ATI's are made for it.

http://www.xbitlabs.com/news/cpu/dis...731144157.html