Posts by tanbam

Quote: Originally Posted by saravanan_83 good, first before knowing to get new battery u should know any new battery can stans upto 4 to 6 hours at the maximum.anyway i will give u tips that how to use uŕ battery...

I remember hearing a while back that there were some CDs sold with copy protection that would install some software automatically if you put the CD in a computer. One of the reasons that the company doing this (Sony, if I remember...

There's a flash media card slot, and an express card slot, but there isn't any "card" for the video. If you've got experience desoldering the video ICs from the mobo and resoldering new hardware, more power to you. Tell us...

Go to HP's website and browse to the support page for your notebook. Go the manuals section; there should be a service guide that explains in great step-by-step detail how to disassemble your notebook.

Buy some solder-wick and mop up the blob. There is a LOT of extra solder on that pad, and everything surrounding it is GND. It's very likely that you have scratched off some of the green solder-mask close to the target pad, and that...

This happens to me as well, both on my Vista and XP partitions. It also happened on my last notebook, which wasn't HP. It's something that I've just gotten used to. What is even more bothersome, to me at least, is that other services...

Has anyone been able to get this working on an Intel-based dv9500? I've attempted it a couple of times, and I always end up with the blue screen. There's no option to disable the SATA in any of the BIOs versions that I can install;...

To expand on the above post, you can charge it up to ~40%, seal it in a plastic bag, and stick it in your freezer. Take it out a couple times a year, let it warm up to room temp, and charge it up, discharge it, and charge it back up t0...

I started having the random shutdowns a few months ago, increasing in frequency until I couldn't take it any more. After a clean install of XP, I determined that it was a hardware fault, not some random software/configuration...

It may be working now, but it might be worth it in the long run if you open it up (which isn't TOO hard) and get that stuff out. The liquid and sugar and all of that junk will start corroding traces on your circuit boards, but it may...