Posts by Zep--

It's a Samsung LTN154X1 WXGA (according to the PANEL ID STRING string it provided my Debian GNU/Linux with during setup) Zep--

Dust Devil: change settings in power options to home office desktop computer. Speed will then be at max when running or idle Zep--

no, voltage is adjust automatically based on processor load. All you want to do is adjust the HTT value under the Clocks button. click on get values. then click on the HTT clock picture, then adjust up with the arrow keys. I have mine...

ok..seems you can only up the FSB (HTT) value. Default HTT was 200.45 and CPU Clock would say 2004.456MHz Upped the HTT to 230.88, CPU Running at 2308.85MHz, seems stable so far. Zep--

thanks. Did you mess with the voltage at all or just set the multipler? Hmm, Doesnt seem to keep the speed after you set it. As soon as I run an App, it drops back down to normal values. Zep--

8 and 1/4 times on my 6809. (mem upgraded to 768) just a tad under 15 seconds. Probably because of the 4200 speed HardDrive. Zep--

I just instaled the Omega drivers today, havent noticed any problems. www.omegacorner.com Need to uninstall the Just ATI Control panel from add and remove programs before installing the omega drivers. Does you RAM Upgrade slot...

Uh..I am kinda disappointed.. I bought this M6809 NB and an extra 512 mem stick..I go to upgrade the mem when I get it home ...and I have to REMOVE 256 Mem stick in the upgarde slot to insert my 512!!!! Why didnt they put a 512 in...

The ClockGen page has several differnt version depending on what motherboard you have (Abit, Asus,Epox, etc..) What version do I download to try and OverClocj the AMD 64 CPU for the M6809? Or is it not possible. Thanks. Zep--