888X new keboard firmware ... The link to the file is a dead end now. I have a 8880. Was wondering if anybody out there has the file and can post a link or em ...

PCTORQUE · 03-03-2003, 05:28 PM

This is supposed to take care of any chances of the system overheating problems with stanby a couple of people had...

If you have the later 8887 system shipped with HT enabled you probably already have this update, but for those with the 8886/8887 this may be a solution to any chance of the overheating when going to standby.

Please download the file from HERE.

Once downloaded to your desktop

Insert a floppy disk and create a boot disk by clicking my computer and right clicking on the A: drive and going to "Format":

Once you've created your startup disk, double click and execute your H8-23.exe file you downloaded:

Now, reboot the computer off the floppy drive. If your computer is booting to Windows, you need to change the boot sequence. To do this, during boot up, press CTRL/ALT/S and jump into the bios, go to the startup/boot sequence tab and select the first boot device to be the floppy drive by using Tab, the arrow keys, and the space bar:

After you've changed the boot sequence (if you needed to), save your settings and restart:

You will boot up to an A: prompt
At this point, you type "h8.bat" This will execute the batch file:

This will flash the firmware and you're set.

Ratswallow · 03-03-2003, 05:37 PM

Is there a way to see if this new firmware is already implemented?
I'm getting my 8887 tomorrow (Thanks Adam and PCTorque!) and just want to be sure I don't melt anything!!!!!

Melt Bad, Sager Good!!

daryl · 03-03-2003, 07:30 PM

The photo's of the BIOS only show the possible boot possiblilites as Drive C, CD, and Floppy. If we have a second hard drive, can we set the BIOS to boot on the second hard drive?

Thanks

Jeff Harp · 03-03-2003, 07:51 PM

Done! Thanks for posting the easy link.

PCTORQUE · 03-03-2003, 09:02 PM

daryl,
No, not from what I have seen... it's just single,main drive boot, but of course if it's something people want, maybe it's something that can be worked on =)

Lakitu7 · 03-04-2003, 03:31 PM

NP8880 Compatable?

Jeff Harp · 03-04-2003, 09:06 PM

I just wanted to say that after I did the keyboard and memory stick driver installs, all the other minor oddities that were happening have quit.

anunay · 03-04-2003, 10:22 PM

I'll be updating my BIOS tonight.

I have few question.

1) My sager 8886 has 2.8GHz Processor, will this firmware upgrade enable HT on it as well ?

2) Why is it called 888x keyboard firmware upgrade, when it is supposed to fix heat related issues ?

tyrchon · 03-05-2003, 10:33 AM

Quote:

I'll be updating my BIOS tonight.
I have few question.

1) My sager 8886 has 2.8GHz Processor, will this firmware upgrade enable HT on it as well ?

2) Why is it called 888x keyboard firmware upgrade, when it is supposed to fix heat related issues ?

From my understanding only the 3.06 GHz processor is HT ready.
For the other question, the keyboard helps in heat dissipation, the exact means it does that I'm not sure; someone else will have to answer that one.

Ranger · 03-05-2003, 05:15 PM

Done it, no problems. 8887 2.4ghz 512ram.
What about the HT? Would updating my bios help, hurt, or just a wast of time untill I decide to upgrade to the 3.06 HT?

eger · 04-09-2003, 12:48 PM

applied this BIOS update and still getting the keyboard freezing about 1 out of 5 startups. I just purchased this laptop and i belive it already had the latest BIOS so i'm still stumped. So far this is the smallest of my glitches, wish rebooting fixed everything =)

beakmyn · 04-09-2003, 04:48 PM

Quote:

applied this BIOS update and still getting the keyboard freezing about 1 out of 5 startups. I just purchased this laptop and i belive it already had the latest BIOS so i'm still stumped. So far this is the smallest of my glitches, wish rebooting fixed everything =)

Model:
OS:
Service Pack:

I had problems on my 8886 with 2000 SP3. Replaced the i8042prt.sys file (keyboard driver) and seemed to solve the problem. I'm now running XP without any problems.

eger · 04-09-2003, 05:45 PM

8887
Windows XP
SP1

And i just restarted because I had no keyboard! =\

rwbroers · 10-14-2008, 03:39 PM

The link to the file is a dead end now. I have a 8880. Was wondering if anybody out there has the file and can post a link or email it to me?

03-03-2003, 05:28 PM	#1
PCTORQUE NBF Reseller Join Date: Oct 2002 Posts: 1,157 Credits: 1,535	888X new keboard firmware This is supposed to take care of any chances of the system overheating problems with stanby a couple of people had... If you have the later 8887 system shipped with HT enabled you probably already have this update, but for those with the 8886/8887 this may be a solution to any chance of the overheating when going to standby. Please download the file from HERE. Once downloaded to your desktop Insert a floppy disk and create a boot disk by clicking my computer and right clicking on the A: drive and going to "Format": Once you've created your startup disk, double click and execute your H8-23.exe file you downloaded: Now, reboot the computer off the floppy drive. If your computer is booting to Windows, you need to change the boot sequence. To do this, during boot up, press CTRL/ALT/S and jump into the bios, go to the startup/boot sequence tab and select the first boot device to be the floppy drive by using Tab, the arrow keys, and the space bar: After you've changed the boot sequence (if you needed to), save your settings and restart: You will boot up to an A: prompt At this point, you type "h8.bat" This will execute the batch file: This will flash the firmware and you're set. __________________ Tel: 800.346.6986 cs@pctorque.com PC Torque, Inc. 1180 Northern Blvd., Suite 201, Manhasset, NY 11030

03-03-2003, 05:37 PM	#2
Ratswallow Carpe Potus Join Date: Feb 2003 Location: Los Angeles Posts: 18 Credits: -144	Is there a way to see if this new firmware is already implemented? I'm getting my 8887 tomorrow (Thanks Adam and PCTorque!) and just want to be sure I don't melt anything!!!!! Melt Bad, Sager Good!! __________________ "Go Soothingly in the Grease Mud, as There Lurks the Skid Demon." Soon to be Proud Father- 8887X 3.06HT XP Pro 1024 Ram 40Gb5400 HD Combo Drive and the kitchen sink...

03-03-2003, 09:02 PM	#5
PCTORQUE NBF Reseller Join Date: Oct 2002 Posts: 1,157 Credits: 1,535	daryl, No, not from what I have seen... it's just single,main drive boot, but of course if it's something people want, maybe it's something that can be worked on =) __________________ Tel: 800.346.6986 cs@pctorque.com PC Torque, Inc. 1180 Northern Blvd., Suite 201, Manhasset, NY 11030

03-04-2003, 10:22 PM	#8
anunay Member Join Date: Dec 2002 Location: India Posts: 20 Credits: -43	I'll be updating my BIOS tonight. I have few question. 1) My sager 8886 has 2.8GHz Processor, will this firmware upgrade enable HT on it as well ? 2) Why is it called 888x keyboard firmware upgrade, when it is supposed to fix heat related issues ? __________________ Itisdifficulttobeverycreativewithonlyfiftysevencharacters

03-05-2003, 05:15 PM	#10
Ranger Senior Member Join Date: Dec 2002 Location: TN Posts: 89 Credits: -120	Done it, no problems. 8887 2.4ghz 512ram. What about the HT? Would updating my bios help, hurt, or just a wast of time untill I decide to upgrade to the 3.06 HT? __________________ C:\DOS C:\DOS\RUN RUN\DOS\RUN

Notebooks For Sale

User Links

Latest Pricing

Top Posters

Todays Top Posters

Fastest Benchmarks

Latest Benchmarks

03-03-2003, 07:30 PM	#3
daryl Holder of All Knowledge Join Date: Jan 2003 Posts: 102 Credits: -322	The photo's of the BIOS only show the possible boot possiblilites as Drive C, CD, and Floppy. If we have a second hard drive, can we set the BIOS to boot on the second hard drive? Thanks

03-03-2003, 07:51 PM	#4
Jeff Harp USAF Dist. Rifleman #276 Join Date: Feb 2003 Location: Central Oklahoma (not in a town) Posts: 220 Credits: -287	Done! Thanks for posting the easy link.

03-04-2003, 03:31 PM	#6
Lakitu7 Registered User Join Date: Feb 2003 Posts: 7 Credits: -348	NP8880 Compatable?

03-04-2003, 09:06 PM	#7
Jeff Harp USAF Dist. Rifleman #276 Join Date: Feb 2003 Location: Central Oklahoma (not in a town) Posts: 220 Credits: -287	I just wanted to say that after I did the keyboard and memory stick driver installs, all the other minor oddities that were happening have quit.

04-09-2003, 12:48 PM	#11
eger Registered User Join Date: Mar 2003 Posts: 185 Credits: -288	applied this BIOS update and still getting the keyboard freezing about 1 out of 5 startups. I just purchased this laptop and i belive it already had the latest BIOS so i'm still stumped. So far this is the smallest of my glitches, wish rebooting fixed everything =)

04-09-2003, 05:45 PM	#13
eger Registered User Join Date: Mar 2003 Posts: 185 Credits: -288	8887 Windows XP SP1 And i just restarted because I had no keyboard! =\

10-14-2008, 03:39 PM	#14
rwbroers Registered User Join Date: Oct 2008 Posts: 1 Credits: 230	The link to the file is a dead end now. I have a 8880. Was wondering if anybody out there has the file and can post a link or email it to me?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
888x - no audio	mjhampstead	Sager 88XX Tech Support (Tech problems only)	14	05-06-2006 08:24 PM
Modding 888x	sad_story	Sager & Clevo Notebooks	24	11-16-2004 10:48 PM
888x temperatures	Killafornia	Sager & Clevo Notebooks	2	07-11-2003 08:39 PM
888X questions	OraNgeAce	Sager & Clevo Notebooks	5	04-18-2003 12:11 PM
Best Backpack for a 888x (in the UK)	HonkyDog	Sager & Clevo Notebooks	2	03-25-2003 01:28 PM