|
|
#1 |
|
Hard Drive DMA???
I'm trying to use my external ATI USB 2.0 TV Tuner on my 9860 but the tv tuner won't load. When I scan for compatibility I get a warning saying that DMA isn't enabled for all hard drives, even though the Primary IDE Channel has DMA enabled. I'm assuming this is a problem caused from using 2 hard drives as 1 under RAID 0. Any ideas?
__________________
Because sometimes your team just sucks.
|
|
|
|
|
|
|
|
#2 |
|
is dma enabled for your optical drives. I would get this error on my all-in-wonder card sometimes. After re-installing the drivers for the tv tuner, I'd eventuall be able to get it going.
__________________
Satisfy my mind...I can take care of the rest. If you can't satisfy my mind, at least stimulate it a little... PC Torque 9860 3.6Ghz 2gigs ram 80gig hdd x 2 RAID striped External 300GB Hdd DVD/CDRW DL DVD burner TV Tuner XP Pro Sasem USB HDTV tuner Audigy 2ZS pcmcia card Klipsch 5.1 Pro Media Ultra Klipshe DD-5.1 Dolby Digital/DTS preamp Sennheiser PXC250 Headphones Bluetooth Logitech MX900 WiFi module
|
|
|
|
|
|
|
#3 |
|
Where exactly would I be able to enable DMA for the optical drive? I don't have the option when I go to its Properties window.
![]()
__________________
Because sometimes your team just sucks.
|
|
|
|
|
|
|
#4 |
|
Registered User
Join Date: Nov 2004
Posts: 5
Credits: -348
![]() |
You do not choose it from the CD/DVD properties. You have to check at the IDE ATA/ATAPI controllers section of the device manager. In your case it should be under Primary IDE channel>Advanced Properties.
|
|
|
|
|
|
#5 | |
|
Quote:
I got rid of all the DMA warnings except the one for the Promise 2+0 Stripe/RAID0 SCSI Disk Device. I'm guessing I'll have to try using it without RAID installed on the system some day.
__________________
Because sometimes your team just sucks.
|
||
|
|
|
|
|
#6 | |
|
Quote:
![]()
__________________
Because sometimes your team just sucks.
|
||
|
|
|
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Accidently Lost the Hard Drive Adapter when upgrading my 9300 to a new hard drive | TriX | Dell Home (Inspiron, XPS, Studio) | 10 | 01-14-2006 04:49 PM |
| Converting my internal hard drive into an external hard drive | bensjazz | Notebook Forums - General | 4 | 01-13-2006 05:18 PM |
| Can I Disable Internal Hard Drive and boot from External Hard Drive with USB | meta | Dell Home (Inspiron, XPS, Studio) | 4 | 12-24-2005 01:59 PM |
| hard drive data recovery on smoked hard drive! | alphanumeric | Notebook Forums - General | 13 | 09-30-2005 04:21 PM |
All times are GMT -6. The time now is 02:29 AM.








I got rid of all the DMA warnings except the one for the Promise 2+0 Stripe/RAID0 SCSI Disk Device. I'm guessing I'll have to try using it without RAID installed on the system some day.
Linear Mode


