Notebookforums
 
 Home 
       
 Forums 
 
 Guides 
   
Old 12-22-2004, 07:08 PM   #1
emagehtetah
Registered User

Join Date: Dec 2004
Posts: 1
Credits: -349
 
emagehtetah is a n00b, but everyone loves n00bs!
over clocking acer

here is my specs. a lot

the stock voltage is at 75% right? so can i bring it back to 100% to get my full use. Or have i read about oc'ing laptops wrong? Im only getting 10-50 fps on counter strike source with moderate graphic settings. shouldnt i be getting more?

or if you have any other suggestions.

btw, I just bought a laptop cooling pad today.



Processor
Model : Intel(R) Pentium(R) 4 CPU 3.00GHz
Speed : 3.00GHz
Performance Rating : PR3990 (estimated)
SMT Support : 2 Unit(s)
Type : Standard
L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line size, 2 lines per sector

Mainboard
Bus(es) : ISA AGP PCI CardBus USB FireWire/1394
MP Support : 1 CPU(s)
MP APIC : No
System BIOS : AT/AT COMPATIBLE
Total Memory : 511MB

Chipset 1
Model : Acer Inc Radeon IGP9100 Host Bridge
Front Side Bus Speed : 4x 200MHz (800MHz data rate)

Video System
Monitor/Panel : Default Monitor
Monitor/Panel : Default Monitor
Monitor/Panel : Generic Television
Adapter : ATI MOBILITY RADEON 9700 Series
Adapter : ATI MOBILITY RADEON 9000 IGP

Physical Storage Devices
Hard Disk : IC25N060ATMR04-0 (56GB)
CD-ROM/DVD : Slimtype DVDRW SDW-431S (CD 24X Rd, 24X Wr) (DVD 3X Rd, 3X Wr)

Logical Storage Devices
Acer (C : 27GB (6.6GB, 25% Free Space) (FAT32)
Acerdata (D : 27GB (17GB, 64% Free Space) (FAT32)
Roxio9 (E : 703MB (UDF)

Peripherals
Serial/Parallel Port(s) : 1 COM / 1 LPT
USB Controller/Hub : Standard Enhanced PCI to USB Host Controller
USB Controller/Hub : Standard OpenHCD USB Host Controller
USB Controller/Hub : Standard OpenHCD USB Host Controller
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
FireWire/1394 Controller/Hub : Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCMCIA/CardBus Controller : Texas Instruments PCI-1520 CardBus Controller
PCMCIA/CardBus Controller : Texas Instruments PCI-1520 CardBus Controller
Infrared Device : IrDA Fast Infrared Port
Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse : Synaptics PS/2 Port TouchPad
Mouse : HID-compliant mouse
Human Interface : Logitech WingMan Extreme Digital 3D (USB) (HID)
Human Interface : Logitech WingMan Extreme Digital 3D (USB)
Human Interface : USB Human Interface Device

MultiMedia Device(s)
Device : Realtek AC'97 Audio

Communication Device(s)
Device : Agere Systems AC'97 Modem

Operating System(s)
Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 2)

Network Services
Adapter : Realtek RTL8139/810x Family Fast Ethernet NIC
Adapter : WLAN 802.11g mini-PCI Module


Chipset 1
Model : Acer Inc Radeon IGP9100 Host Bridge
Bus(es) : ISA AGP PCI CardBus USB FireWire/1394
Front Side Bus Speed : 4x 200MHz (800MHz data rate)
Width : 64-bit
HTT - Hyper-Threading Technology : No

Logical/Chipset 1 Memory Banks
Power Save Mode : No
Fixed Hole Present : No

AGP Bus(es) on Hub 1
Version : 3.00
Speed : 8x
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit

PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 2
PCI Bus 0 : PCI (1/1x PCIClk)
PCI Bus 2 : PCI (1/1x PCIClk)

CardBus/PCMCIA Controller 1
Model : Texas Instruments (TI) PCI1520 PC card CardBus Controller

CardBus/PCMCIA Controller 2
Model : Texas Instruments (TI) PCI1520 PC card CardBus Controller

Performance Tips
Tip 2536 : System has no SMBus/i2c/BMB bus support.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.



Processor
Model : Intel(R) Pentium(R) 4 CPU 3.00GHz
Speed : 3.00GHz
Performance Rating : PR3990 (estimated)
SMT Support : 2 Unit(s)
Type : Standard
Package : FC µPGA478
Rated Speed/FSB : 3000MHz / 4x 200MHz
Multiplier : 15/1x
Minimum/Maximum Multiplier : 0/1x / 15/1x
Generation : G8
Name : P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz 1.475-1.575V
Revision/Stepping : 2 / 9 (9)
Stepping Mask : D1
Microcode : MU0F2921
Core Voltage Rating : 1.550V
Maximum Physical / Virtual Addressing : 36-bit / 32-bit
Native Page Size : 4kB

Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 2 / 9 (9)

Processor Cache(s)
Internal Data Cache : 8kB Synchronous, Write-Thru, 4-way set, 64 byte line size
Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line size, 2 lines per sector
L2 Cache Multiplier : 1/1x (3000MHz)

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : Yes
ACPI - Software Clock Control : Yes
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : Yes
HTT - Hyper-Threading Technology : Yes
TM - Thermal Monitor : Yes
PBE - Pending Break Enable : Yes
IA64 Technology : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
CID - Context ID : Yes
xTPR - Send Task Priority Messages : Yes
DAZ - Denormals Are Zero : Yes

Advanced Settings
Data Error Checking : No
Fast Strings : Yes
x86 FPU Compatibility Mode : No
Prefetch Queue : Yes
Branch Trace Storage : Yes
Data Cache Active Mode : Yes
IO Queue Depth : 12 request(s)
TM - Thermal Monitor : Yes

Machine Check Architecture Settings
Number of Reporting Banks : 4 bank(s)
Extended Machine Check Support : Yes
Number of Extended Reporting Banks : 12 bank(s)

Variable Range MTRR Settings
MTRR 0 : 00000000-1FFFFFFF (0MB-512MB) WB
MTRR 1 : 1FF00000-1FFFFFFF (511MB-512MB) UC



Video Adapter
Model : ATI MOBILITY RADEON 9700 Series
Chipset : ATI MOBILITY RADEON 9700 AGP (0x4E50)
RAMDAC : Internal DAC(350MHz)
Video BIOS : BK-ATI VER008.017M.095.000
VGA Compatible : No
Total Memory : 64MB (63MB Video) (54MB System)
Texture Memory : 117MB
Supports DIME Texturing : Yes

AGP Capabilities
Version : 3.00
Command Queue Length : 256
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Data Transfer Modes Support : 4x 8x
Current Data Transfer Rate : 8x

Video BIOS
Date : 04/06/24
Version : 8.073

Current Video Mode
Mode : 1280x800 16M+ TrueColour (32-bit)
Current Refresh Rate : 60Hz
Virtual Desktop Size : 1280x800

Video Driver
Model : ati2mtag.sys
Version : 6.14.10.6422
Expected Windows Version : 4.00
Video Acceleration : Yes
Screen Saver Active : No
Low Power Saving Active : No
Power Off Saving Active : No

Enhanced Video Settings
Animation Effects Enabled : No
Full Windows Drag Enabled : No
Font Smoothing Enabled : No
HighContrast Feature On : No

Device Mode Characteristics
Physical Medium Width : 320 mm, 13 in
Physical Medium Height : 240 mm, 9 in
Recommended CRT/Panel Size : 20 in
Horizontal/Vertical Resolution : 96x96 dpi
Colour Bits/Planes : 32 / 1 bit(s) pp
Brushes : 4294967295
Pens : 4294967295
Colours/Shades : 4294967295
Pixel Width/Height/Diagonal : 36 / 36 / 51
emagehtetah is offline   Reply With Quote

Old 12-22-2004, 11:02 PM   #2
MichaelX30
adios
 
MichaelX30's Avatar

Join Date: Sep 2004
Posts: 5,185
Credits: 1,166
 
MichaelX30 is a n00b, but everyone loves n00bs!
All that means nothing to me. lol sorry!
MichaelX30 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Under clocking a P4? BurntOfferings Notebook Forums - General 1 06-22-2005 08:18 PM
How to change under clocking and over clocking jrdonjar0591 Notebook Forums - General 2 06-02-2005 01:02 PM
Over clocking BuRnCyCLE Sager & Clevo Notebooks 13 09-30-2004 06:00 PM
what does Over clocking do? blazehenryson Alienware Area-51 and Aurora Notebooks 8 09-03-2004 02:07 AM
Clocking on the M9 jmsnipe Drivers 9 10-08-2003 07:37 PM



All times are GMT -6. The time now is 09:10 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Copyright © 2001-2010 NotebookForums LLC