Ferrari 4002 Burning problems

Yeah, i can't seem to burn any cd in Nero. Here's my error log.

Masaki

1A20-0218-0370-1725-8155-4331*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <MATSHITA DVD-RAM UJ-845S>Version: D200 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA DVD-RAM UJ-845S >Version: D200 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-845S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-845S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522736kB)
Free physical memory: 78MB (80688kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.10.2005
CueSheet
11:24:13 AM#1 Text 0 File Burncd.cpp, Line 2948
MATSHITA DVD-RAM UJ-845S
SmoothLink activated

11:24:13 AM#2 Text 0 File Reader.cpp, Line 127
Reader running

11:24:13 AM#3 Text 0 File Writer.cpp, Line 122
Writer MATSHITA DVD-RAM UJ-845S running

11:24:13 AM#4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media

11:24:14 AM#5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 226356 ( 50:20.06)

11:24:14 AM#6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:24:14 AM#7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MATSHITA DVD-RAM UJ-845S;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:24:14 AM#8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:24:14 AM#9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 450 (450) = #450/0:6.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 450 blocks [MATSHITA DVD-RAM UJ-845S]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (0) provided
original disc pos #0 + 225907 (225907) = #225907/50:12.7
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 225907 blocks [MATSHITA DVD-RAM UJ-845S]
--------------------------------------------------------------

11:24:14 AM#10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MATSHITA DVD-RAM UJ-845S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 1401600, ISRC ""
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 1401600 1401600 529120352, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
450 | 2 | 0 | 0x41 | 0x00
450 | 2 | 1 | 0x41 | 0x00
226357 | lead-out | 1 | 0x41 | 0x00

11:24:14 AM#11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:24:14 AM#12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11:24:14 AM#13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:24:14 AM#14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)

11:24:14 AM#15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:24:14 AM#16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450

11:24:14 AM#17 Text 0 File Mmc.cpp, Line 16924
StartDAO : CD-Text - Off

11:24:14 AM#18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: SmoothLink -> ON

11:24:14 AM#19 Text 0 File Mmc.cpp, Line 17211
CueData, Len=40
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 02 01 20 00 00 08 00
41 aa 01 24 00 32 14 07

11:24:22 AM#20 Text 0 File Cdrdrv.cpp, Line 1286
11:24:22.078 - MATSHITA DVD-RAM UJ-845S\H1 T0 : Queue again later

11:24:29 AM#21 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07B00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1C 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0xFF 0xFF 0xD2 0xA9 0x0A
0x00 0x00 0x15 0x12 0x73 0x03

11:24:29 AM#22 CDR -1106 File Writer.cpp, Line 311
Power calibration error

11:24:29 AM#23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:24:29 AM#24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:24:29 AM#25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 3:28:14 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 24/03/2004 6:44:50 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 24/03/2004 6:45:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 24/03/2004 6:45:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

as you can see it says
"11:24:29 AM#22 CDR -1106 File Writer.cpp, Line 311
Power calibration error"

Any idea's how i'd fix this?

yeah i'm plugged in. I uninstalled the original buring software that could of done some damage. do you know the what the original burning software was?