NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Home (Inspiron, XPS, Studio) › Post your 7800 Go GTX 3DMark05 scores
New Posts  All Forums:Forum Nav:

Post your 7800 Go GTX 3DMark05 scores - Page 12

post #221 of 267
1/10/06 at 6:29pm
If you flash BIOS with the bootdisk provided it will only affect your clocks when you are in 3d mode. Desktop, word, internet = 2d. Games such as FEAR and AOE:III = 3d. You wont be changing your 2d settings with this bootdisk, but you may consider loswering your 2d clocks. Oh yeah, movies are 2d as well.
Reply
Reply
post #222 of 267
1/10/06 at 6:53pm
I feel your pain K6, your card and mine must be brothers or something. I just tried 480/1250 and it crashed 3dmark05 before it finished and it was artifacting like crazy during the second test. I'm not going to bother trying to overclock this card anymore.
Reply
Reply
post #223 of 267
1/10/06 at 7:03pm
I belived that if you should have a 3dmark score it should be without artifacts? If not, everyone could get higher scores?
Reply
Reply
post #224 of 267
1/10/06 at 7:06pm
How do i downclock 2d?
Reply
Reply
post #225 of 267
1/10/06 at 7:32pm
Hrmm my card seems the same, i can get it stable at 450/1250 but thats it. Any higher on the core and it starts to spas out in games.
Reply
Reply
post #226 of 267
1/10/06 at 9:20pm
I see some artifacts. It's not really bad.
In my opinion a 3DMark Score is valid when you can pass 3DMark at that frequency.
Would you only post SuperPi 1M scores when your CPU passes 32M at that frequency as well? Your CPU produces errors ... but too small to recognize.

I see benching as a competition. (I wouldn't let my card run with higher vchip 24/7 either). So a clockspeed is stable enough when it passes 3DMark. How would you compare oc results otherwise?
Reply
Reply
post #227 of 267
1/10/06 at 10:21pm
Quote:
Originally Posted by xsky
I see some artifacts. It's not really bad.
In my opinion a 3DMark Score is valid when you can pass 3DMark at that frequency.
Would you only post SuperPi 1M scores when your CPU passes 32M at that frequency as well? Your CPU produces errors ... but too small to recognize.

I see benching as a competition. (I wouldn't let my card run with higher vchip 24/7 either). So a clockspeed is stable enough when it passes 3DMark. How would you compare oc results otherwise?
Bingo, passing is the only definite way to compare, anything else is too subjective. I get almost zero artifacts at 477MHz. The core just craps out and 3DMark05 freezes. I think it's a power issue
Reply
Reply
post #228 of 267
1/16/06 at 3:44pm
just got a 7800 gtx go from ebay ( im in the uk)

3dMark05 says 6738 with X-treme G 81.97 drivers
Default Clock speeds

2.26Ghz cpu
2Gb ram
Reply
Reply
post #229 of 267
1/16/06 at 3:54pm
I did some stress testing as well. 440MHz with normal voltage is runs hours of artifactsan. 460MHz does not ... I didn't care for the rest for 24/7
Mem is at 1250MHz.

Upping to 1.4V helped a lot for the 3DMark stability in my case.

@Tanamoril
Why on earth shouldn't I start a stress test at 500/1320? It would fail, ok, but the card wouldn't get that so much hotter than with 440/1250.
Reply
Reply
post #230 of 267
1/25/06 at 5:25pm

Umm... pwnage?

New high for me:

8331

http://service.futuremark.com/compare?3dm05=1746781

Clocks were 495/1350. The core won't do 500MHz, locks up in the Firefly test (Test 2). However, the RAM is rock solid and still have plenty of room too go, might even be able to hit 1400MHz with the right temps . Anyway, I'll see if I can hit 8.5k and I'll also do an 06 run when I get some more time
Reply
Reply
post #231 of 267
1/25/06 at 5:49pm
Sheesh, lol ^^. for everyday, you don't use a volt mod, right?
Reply
Reply
post #232 of 267
1/25/06 at 5:54pm
Quote:
Originally Posted by Mr. K6
New high for me:

8331

http://service.futuremark.com/compare?3dm05=1746781

Clocks were 495/1350. The core won't do 500MHz, locks up in the Firefly test (Test 2). However, the RAM is rock solid and still have plenty of room too go, might even be able to hit 1400MHz with the right temps . Anyway, I'll see if I can hit 8.5k and I'll also do an 06 run when I get some more time
That is pretty salty Mr. K6! Good job!
Reply
Reply
post #233 of 267
1/25/06 at 6:16pm
i think i figured out why im getting artifatcs in atitool with 380core with my 6800. the temps were going over 70. i set up fan gui and it doesnt get over 67 in atitool. its running solid for over 30mins so far. btw, where do you guys put the slider in the artifact scanning settings?
Reply
Reply
post #234 of 267
1/25/06 at 6:25pm
Quote:
Originally Posted by Master_Axe
Sheesh, lol ^^. for everyday, you don't use a volt mod, right?
I haven't done a volt-mod period.
Quote:
Originally Posted by newguru
That is pretty salty Mr. K6! Good job!
Thanks!
Quote:
Originally Posted by basso4735
i think i figured out why im getting artifatcs in atitool with 380core with my 6800. the temps were going over 70. i set up fan gui and it doesnt get over 67 in atitool. its running solid for over 30mins so far. btw, where do you guys put the slider in the artifact scanning settings?
Temps and thermal contact of the core make a big difference. I have the slider all the way to the left.
Reply
Reply
post #235 of 267
1/25/06 at 6:48pm
i was just playin WoW and played GW and CSS lastnite with my core up at 460/1250 dont even see artifacts, only was gettin up to 88C playin WoW for 1hr.
ATI tool prob says otherwise

Guess i should try hittin 8000s in 3dmark05 too!

I think adding height to my cooler helped alot
Reply
Reply
post #236 of 267
1/25/06 at 7:31pm
mr.K6, what do you have your fan settings on?
Reply
Reply
post #237 of 267
1/25/06 at 8:41pm
2.0 CPU, 2GB OCZ, Extreme-G 81.98, OC'd to 435/1150.

7,245

Not playing any heavy games at the moment, so I haven't really tried to push it. Ghost Recon reaches 120+ FPS at 1920x768 and maxiumum everything in the graphics settings. Good enough for me!

-Doc
Reply
Reply
post #238 of 267
1/25/06 at 9:28pm
only 7651 in 3dmark05? with 82.12 @475/1300
what drivers are you guys using? K6?
i now its a clean install cause just reformatted!
Reply
Reply
post #239 of 267
1/25/06 at 9:39pm
Quote:
Originally Posted by basso4735
mr.K6, what do you have your fan settings on?
Whatever the BIOS defaults them as; I dont run FanGUI during benchmarking in order to save a few precious CPU cycles . The secret is I benchmark in front of an open window. It was 3C here today, the CPU idled at 16C and the graphics card idled at 30C . I also remove the plates that cover the RAM and the wireless in order to get more airflow in. Heck, I could probably remove the keyboard if I really need to, but the card needs more voltage, there are no heat artifacts.

Quote:
Originally Posted by stratfellow3
only 7651 in 3dmark05? with 82.12 @475/1300
what drivers are you guys using? K6?
i now its a clean install cause just reformatted!
Your CPU at 2.0GHz is going to hold you back a bit. I get 4657 @ 460/1240. That benchmark today was tony's 81.98's installed with the enhanced settings. When I really go for the gold I'll install them at stock with no quality tweaks
Reply
Reply
post #240 of 267
1/25/06 at 9:44pm
82.12s or are 81.98s still better drivers?
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Home (Inspiron, XPS, Studio) › Post your 7800 Go GTX 3DMark05 scores