New Posts  All Forums:Forum Nav:

maxing out memory in an 8890 - Page 2

post #21 of 24
Thread Starter 
Should do. A quick check on the PQI website seems to indicate they have the right specs.

I noticed that PQI also has the dual channel matched pair ones. Don't know if new egg does those. The idea is that the 8890 reads from both chips simultaneously thus effectively doubling the memory's bandwidth. What can happen is that if you get two SO-DIMMS from different batches their timing can be ever so slightly out and thus throw the dual channel system into wait states thus hampering its top speed. By buying the matched pair (effectively boards with chips all from the same batch) you don't get (or shouldn't get) any timing differences.

See the top entries on the PQI webpage - they are DUAL CHANNEL matched pairs.
http://www.pqimemory.com/power_memory.asp

You will probably find that even buying the newegg individual ones you are likely to get chips from the same batch. The dual channel matched pair ones are usually more expensive because they have to be matched.

In reality you will probably never even see the effect anyway.

"A little more life out of your 8890..." my 8890's are still powering along. I expect to get at least another 4-5 years of service out of them. Besides the performance of newer laptops just doesn't yet justify the leap forward (nor does running Blusta (ie Vista)).
post #22 of 24
honestly, I didn't expect such a thorough reply so thanks mate!

I do know about the dual-channel/ matched pair stuff... but since this isn't really a performance rig (anymore) it's not a huge deal if I take a little slowdown. I just wanted to make sure i was buying stuff that would work.

I have to agree about this machine still powering along... it got me through 3 years of graduate architecture school (...intense 3d graphic work with cpu use @ 100% for days on end with ram overflowing)... and since I spent a fortune on it back in the day - has turned out to be a wise investment

though it was never a quiet machine (since the P4 northwood it's based off of is almost the hottest chip ever made) I would like to quiet the machine down some though... the fans run constantly at almost max and it's not because of dust buildup on the HSF. This is basically a home rig used for not much more than internet (well maybe a little photoshopping and HL2) so noise is a concern... I've started another post in general laptops about lappy coolers that blow UP into the 8890's intakes but if there's something else i can do, internally, I"m not opposed to it as i'm no stranger to the inside of a computer
post #23 of 24
Thread Starter 
You may find that the noise you have is related to the internal memory fan.

There is a thread about fixing that. Basically the internal fan resonates against the motherboard - hence the loud noise.

If you get some of that thin foamy sheet stuff they wrap around most electronic gear these days, play with an Exacto knife, remove the fan (not with the knife but with screwdriver), cut out a piece of foam with a hole for the air to flow thru then put the whole thing back in place it will quieten it down immensely.

Of course if the CPU/GPU are churning out work then the main fans will be going but they shouldn't be that loud.
post #24 of 24
yeah, I've already done the memory fan mod but may need to look at it again. I may try to find some really thin neoprene and see if that helps any more.

true,... when i'm working they are not at max speed but shortly after starting rendering at full load on the cpu... those babies spool up and sound like jets...
New Posts  All Forums:Forum Nav:
  Return Home