I am having problems replacing the jack on an older Sony Laptop PCG-FX150 (PCG-953A). The problem with the Laptop was a loose jack. I would have to wiggle the connector to get the laptop to come on. So I ordered a new jack. After I soldered the new jack in place I am not getting any power at all. I tested the bottom of the jack plug and it is getting power with a volt meter. Do you think I could have damaged something in the solder process or that the solder is not making a good connection?
Any advice or help would be greatly appreciated.
Thanks,
Eric
Any advice or help would be greatly appreciated.
Thanks,
Eric




