NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Home (Inspiron, XPS, Studio) › If you have successfully done a pin mod, check in
New Posts  All Forums:Forum Nav:

If you have successfully done a pin mod, check in - Page 3

post #41 of 82
2/21/06 at 5:28pm
1.6 -> 2.13 @ 1.180 V and 800MHz @.700V
Idles at 25C (right after cleaning out dust and @ 800Mhz)
Loads at 43C.
Cost $120 shipped from eBay.
Reply
Reply
post #42 of 82
2/21/06 at 6:00pm
Thread Starter 
Quote:
Originally Posted by Stellus
Where's the 2.0 -> 2.6 pin mods?
No one has posted about it.
Reply
Reply
post #43 of 82
2/21/06 at 6:21pm
Thread Starter 
Updated.
Reply
Reply
post #44 of 82
2/22/06 at 6:33am
I wanted to add the my voltage is 1.340. Also this list should include the video card and perhaps a 3dmark score to show people what they can expect to get if they decide to try a pin mod. Just for the record my vid card and 3dmark score are in my sig.
Reply
Reply
post #45 of 82
2/22/06 at 6:45am
1.6->2.13

never idles (i run folding @home 24/7)

Never see loads over 51 degrees.

But it is undervolted @ 1.244v at 2.16ghz

I also have ik9fangui set to kick fans to max at 51.

It also sits on top of a coolermaster notepal cooling pad.

i paid 140 dollars for the cpu off of ebay.

tonight during a 2 hour session of lineage 2 the cpu got up to 49 and GPU 81

both have as5.
Reply
Reply
post #46 of 82
2/22/06 at 7:00am
I have an XPS M170, at 2.13 stock. Is it worth the inherent risk to pin mod this laptop?
Reply
Reply
post #47 of 82
2/22/06 at 7:07am
Thread Starter 
Quote:
Originally Posted by wiltedjoint
I wanted to add the my voltage is 1.340. Also this list should include the video card and perhaps a 3dmark score to show people what they can expect to get if they decide to try a pin mod. Just for the record my vid card and 3dmark score are in my sig.
Not a bad idea! Just TRYING to get more work outta me eh!

haha, I will see if I can add them in the list as well, but I'm not sure if people will coorperate and post that.
Reply
Reply
post #48 of 82
2/22/06 at 7:08am
Thread Starter 
Quote:
Originally Posted by phyrewall
I have an XPS M170, at 2.13 stock. Is it worth the inherent risk to pin mod this laptop?
I wouldn't think so. Unless you get a 1.8 745 and pinmod it to ~2.4, or the 2.0 and pinmod it to ~2.6

If your happy with the results of your current setup, why change it? Kind of like, if it aint broke, don't fix it!
Reply
Reply
post #49 of 82
2/22/06 at 7:12am
Thread Starter 
Fixed wilted joint, added 2sl0w.
Reply
Reply
post #50 of 82
2/22/06 at 7:25am
yeah, 37 idle. oops. I still haven't been home so I have no AS on the thing, which is why it is so hot.

and I think adding 3dmark scores is a silly idea.
Reply
Reply
post #51 of 82
2/22/06 at 7:29am
Thread Starter 
Quote:
Originally Posted by Hazridi
yeah, 37 idle. oops. I still haven't been home so I have no AS on the thing, which is why it is so hot.

and I think adding 3dmark scores is a silly idea.
Fixed!
Reply
Reply
post #52 of 82
2/22/06 at 8:26am
Nice job. This makes me want to try the 1.8 -> 2.4 around when the waranty runs out and it may seem a bit sluggish with the new chips arriving.

1.8s should be pretty cheap too.
Reply
Reply
post #53 of 82
2/22/06 at 8:44am
Quote:
Originally Posted by phyrewall
I have an XPS M170, at 2.13 stock. Is it worth the inherent risk to pin mod this laptop?
What inherent risk are you referring to?
Reply
Reply
post #54 of 82
2/22/06 at 12:05pm
Skillz, FYI for the table, my voltage is 1.340V @ 2.26.

Noody
Reply
Reply
post #55 of 82
2/22/06 at 3:47pm
1.6 -> 2.13 I have not changed the stock voltage.
Reply
Reply
post #56 of 82
2/22/06 at 4:38pm
Thread Starter 
Quote:
Originally Posted by Angry Nude
Skillz, FYI for the table, my voltage is 1.340V @ 2.26.

Noody
Fixed.
Reply
Reply
post #57 of 82
2/22/06 at 4:40pm
Thread Starter 
Quote:
Originally Posted by Pugsly0014
1.6 -> 2.13 I have not changed the stock voltage.
Whats the temps?
Reply
Reply
post #58 of 82
2/22/06 at 5:26pm
Quote:
Originally Posted by Skillz
Whats the temps?
At idle I am sitting at about 39c. After about 8 hours of WoW it's about 53c. I believe thats a little high, so after I replace the motherboard due to an accident lastnight (See Link). I will play with the voltage to try and get the temps down.
Reply
Reply
post #59 of 82
2/22/06 at 11:02pm

Stable at 2.26 with 1.196v

1.7-->2.26Ghz at 1.196v. Did 14 hours of Priming and found it stable as ever.

Played 45 mins of Fear and did not see a hitch.

CPU Temps 29 at idle and 60 with Prime95.

----------------------------------------
Gen2 with 7800 GTX (modded)
Reply
Reply
post #60 of 82
2/23/06 at 12:18am
1.8ghz -> 2.4 @ 1.404v

Dell Precision M70


Idle: 40C (min fan)
Load: 60C
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Home (Inspiron, XPS, Studio) › If you have successfully done a pin mod, check in