NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Home (Inspiron, XPS, Studio) › If you have successfully done a pin mod, check in
New Posts  All Forums:Forum Nav:

If you have successfully done a pin mod, check in - Page 4

post #61 of 82
2/23/06 at 3:29am
Quote:
Originally Posted by wiltedjoint
What inherent risk are you referring to?
Nuking the chip, mostly. I don't exactly get tech support out here.
Reply
Reply
post #62 of 82
2/23/06 at 3:46am
success.... traded a 7800 go gtx for a 2.0->2.67 pin /volt modded dothan stable...running prime 95 as we speak 10+ hours...and counting srtjustin helped install it!!! jh4250 traded me for the RARE 2.67 WONDER YAY
Reply
Reply
post #63 of 82
2/23/06 at 5:29am
1.8 @ 2.4
Stock Voltage @ 1.340V
Idles at 26C
Load at 71C (after 2 hours FEAR)

Cost $15.00 bucks! $140.00 shipped less $125.00 for my 1.6

(See my sig for my 7800GTX upgrade cost! )
Reply
Reply
post #64 of 82
2/23/06 at 5:10pm
Thread Starter 
Quote:
Originally Posted by Pugsly0014
At idle I am sitting at about 39c. After about 8 hours of WoW it's about 53c. I believe thats a little high, so after I replace the motherboard due to an accident lastnight (See Link). I will play with the voltage to try and get the temps down.
Added you.
Reply
Reply
post #65 of 82
2/23/06 at 5:13pm
Thread Starter 
Quote:
Originally Posted by nkhan
1.7-->2.26Ghz at 1.196v. Did 14 hours of Priming and found it stable as ever.

Played 45 mins of Fear and did not see a hitch.

CPU Temps 29 at idle and 60 with Prime95.
Added you.
Reply
Reply
post #66 of 82
2/23/06 at 5:15pm
1.7 -> 2.26 @ 1.340V
Idle 40°C
Load 60°C
Reply
Reply
post #67 of 82
2/23/06 at 5:15pm
Thread Starter 
Quote:
Originally Posted by Shadowmage
1.8ghz -> 2.4 @ 1.404v

Dell Precision M70


Idle: 40C (min fan)
Load: 60C
Added
Reply
Reply
post #68 of 82
2/23/06 at 5:18pm
Thread Starter 
Quote:
Originally Posted by Adrenolin
1.8 @ 2.4
Stock Voltage
Idles at 26C
Load at 71C (after 2 hours FEAR)

Cost $15.00 bucks! $140.00 shipped less $125.00 for my 1.6

(See my sig for my 7800GTX upgrade cost! )
added you
Reply
Reply
post #69 of 82
2/23/06 at 5:20pm
Thread Starter 
Quote:
Originally Posted by cinders
1.7 -> 2.26 @ 1.340V
Idle 40°C
Load 60°C
added you
Reply
Reply
post #70 of 82
2/23/06 at 5:24pm
Quote:
Originally Posted by Skillz
added you
The stock voltage is 1.340V.. I updated my post above.

btw.. cool idea you had here. Give an idea of how many people have actually done this.
Reply
Reply
post #71 of 82
2/23/06 at 5:28pm
Thread Starter 
Thanks, I'm not sure what the stock voltages are, so when people tell me "stock voltages" I'm like, uh..right!

More people need to check in to, like I haven't recieved anyone from the 2.0 --> 2.66 pinmod, and I know we have A LOT more 1.7 pinmods too.
Reply
Reply
post #72 of 82
2/23/06 at 6:12pm
As far as I am aware, for everything 2.13GHz and slower, stock voltages are 1.0V @ low cpu speed and 1.340V @ full cpu speed.

Nood
Reply
Reply
post #73 of 82
2/23/06 at 7:21pm
Quote:
Originally Posted by Angry Nude
As far as I am aware, for everything 2.13GHz and slower, stock voltages are 1.0V @ low cpu speed and 1.340V @ full cpu speed.

Nood
my 2.13 is 1.356 stock
Reply
Reply
post #74 of 82
2/24/06 at 4:51pm
Thread Starter 
I think different clock speeds have different voltages, I could be wrong, but that's how I understood it.
Reply
Reply
post #75 of 82
2/25/06 at 9:18pm
Thread Starter 
I know we have more pinmodders than this!
Reply
Reply
post #76 of 82
2/25/06 at 9:28pm
Quote:
Originally Posted by
Total spent on pinmod: $120 for the CPU from Ebay + $6 for AS5 - (Whatever I can sell my 1.6GHz CPU for)
Reply
Reply
post #77 of 82
2/25/06 at 11:49pm
Quote:
Originally Posted by Tyrant
Total spent on pinmod: $120 for the CPU from Ebay + $6 for AS5 - (Whatever I can sell my 1.6GHz CPU for)

I got 125.00 for my 1.6 on ebay a few weeks ago. If you are able to do that you'd have actually made money in the upgrade! I haven't seen anyone else sell a 1.6 for nearly that much though. Good luck. Ohh.. btw.. I see you got it working.
Reply
Reply
post #78 of 82
2/26/06 at 12:37am
Thread Starter 
I wonder how much I can get my 1.86 for.
Reply
Reply
post #79 of 82
2/26/06 at 12:37am

1.6->2.13

1.6@2.13ghz stock voltages were .998 low & 1.340 high. My safe everyday voltages are 16 x multiplier 1.228v
14 x multiplier 1.116v
12 x multiplier 1.020v
10 x multiplier 0.924v
8 x multiplier 0.828v
6 x multiplier 0.732v
I have had this chip at 0.700 low6xmultiplier and .998v high 16xmultiplier. but for some reason halflife 2 would crash becuase of it. No other game or app, just hl2. not even fear. So, I run them a bit higher as I love that game and play it all the time.
Reply
Reply
post #80 of 82
2/26/06 at 6:35am
I seem to be the only 2.26 at 1.26....sounds like I have a good chip....too bad I cant go higher.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Home (Inspiron, XPS, Studio) › If you have successfully done a pin mod, check in