New Posts  All Forums:Forum Nav:

HP's QuickPlay v2.0 - Page 31

post #601 of 910
11/29/06 at 3:07pm
Let try to explain what´s going on in my isntallation...
I renamed my DVDROM to X: drive letter, and in the installation of QuickPlay, it creates a 1GB partition. rename it to X: , and copy all the files of Quickplay.
When you restart the computer, the installation finish in the MSDOS mode.
I only rename my DVDROM to Z: , and the installation finish sucefull!!!

If somebody have the same error code that mine ( -2147418113 ), try to do this, I thinks that´s will work!!

Glauber
Reply
Reply
post #602 of 910
11/29/06 at 10:49pm
Quote:
Originally Posted by AmigaDude
Strange .. I just retried my DV1000 and it goes in increments of 10, from 0 to 100.

- Do the Volume Bars increment past the first one?
- Can you increase past 10 by clicking the mouse on the speaker icons, instead of the volume keys?
Yeah, the Windows Quickplay works in exactly that manner, but QP Direct jumps from 0 to 10, with nothing in between. So the 10 volume is basically inaudible, in fact, I don't think I can hear it at all. I'll investigate that further with a good pair of headphones. It does this whether I use the remote, the buttons on the laptop itself, or try click on the volume icon with the mouse. Also, I got the latest update through QP Windows, but this doesn't have anything to do with QP Direct, and to my recollection, it did this before and after I updated, so it shouldn't be an issue.

If I try reinstalling again, are there any particular steps I should take other than simply deleting the partition and reinstalling? Thanks again.
Reply
Reply
post #603 of 910
11/30/06 at 11:15am
Quote:
Originally Posted by jgibbons72
... Also, I got the latest update through QP Windows, but this doesn't have anything to do with QP Direct, and to my recollection, it did this before and after I updated, so it shouldn't be an issue.

If I try reinstalling again, are there any particular steps I should take other than simply deleting the partition and reinstalling? Thanks again.
I found that the QP Update does in fact update the QP Direct installation, sort of. When I first did the update, I thought like you that it just ignored the Direct installation since it was not auto updated. It's been awhile since I did it, but I think what I had to do was force the Direct install to not Resume from Hibernation. Hit the F8 key while starting QP Direct to bring up the WinXP menu and select Delete Restoration, or something like that, then it actually says that it is updating the QP files.

As for reinstalling, nothing to do except delete the partion and rerun install. (actually, you could skip the partition delete, but why bother..) It really is a self-contained install so it ignores everything except the install files (and some registry entries which guide the installer).

One thought process for your troubles is that the installer has to figure out which machine you have so that it installs the correct video and Audio drivers. I guess it is possible that it is selecting the wrong machine type.

What is your System Board ID from the Bios screen? Should be 4 characters like 30AE.
Reply
Reply
post #604 of 910
12/2/06 at 5:34am
Quote:
Originally Posted by AmigaDude
One thought process for your troubles is that the installer has to figure out which machine you have so that it installs the correct video and Audio drivers. I guess it is possible that it is selecting the wrong machine type.

What is your System Board ID from the Bios screen? Should be 4 characters like 30AE.
Well, I checked out the board ID number and it's 30B2. I also verified that I'm pretty sure no sound at all is coming, as I used a good pair of headphones and I couldn't hear a thing.

I'll check out the stuff related to updating and reinstalling this weekend and see what happens.

Thanks again for all your help.
Reply
Reply
post #605 of 910
12/6/06 at 9:24pm
Can someone re-upload the QPW 2.1???

The link
QPW:
http://depositfiles.com/en/files/295897

Doesnt work anymore

Thanks
Reply
Reply
post #606 of 910
12/8/06 at 3:26am

Installing QuickPlay Direct 2.x on Vista

QuickPlay Direct 2.x can be reinstalled on Vista. You'll need to burn a DVD of SwSetup before wiping the factory load. I'd recommend creating the Recovery DVDs so you can safely remove the hp_recovery partition as well. Leave the QPD partition alone or leave space for it during the Vista installation (although Vista can resize partitions!) Also, the QPD partition MUST be the 2nd primary partition, so if you are creating multiple partitions make one primary, and the rest extended/logical.

After installing Vista, go into Disk Management. If necessary, create a 1GB (1028 MB) primary partition and format it NTFS. Assign the drive letter X: to the QP partition. That's the trick. The HPQPDP Setup can't create the volume, so you have to do it, and it has to be X:

Run \SwSetup\HPQPDP\setup.exe. If it bombs with a ComponentMoveError, there's something wrong with the X: drive (wrong letter or not formatted?). If setup completes, the X: drive will disappear. Restart and the machine should boot into QPD to finish setup.

FYI, QuickPlay Direct 2.0 is 100% compatible with the Vista's MBR. These steps should also work on any version of XP.
Reply
Reply
post #607 of 910
12/8/06 at 12:34pm
Ran accross this in another thread. Might help so I'm reposting it here

http://www.notebookforums.com/post2501281-3.html


not enough space in QP part
Quote:
Originally Posted by seaside1982
After reading so many posts, thanks all. I finally get me XP pro work. However, when I change to the QP 2.0 by pushing the sensor DVD/QP. I loaded sucessfully,but give out the following error before the QP menue comes out.
"unable to reserve hiberfile error:c0000"


Quote:
Originally Posted by ArcCoyote
Was that full error code c000007f? That usually means "DISK FULL"

I got it after recreating the QP partition from Vista.

Boot to windows, open disk management, and assign a drive letter (I used X to the 1GB Quickplay volume. Enable "show hidden files" and "show critical system files" in folder options. Browse it from explorer and see if there are any temp files taking up space. If there's a (hidden) hiberfil.sys, delete it. When you are done, remove the drive letter from the volume so nothing messes with it.
Reply
Reply
post #608 of 910
12/9/06 at 12:18am
Quote:
Originally Posted by WeAreNotAlone
Ran accross this in another thread. Might help so I'm reposting it here

http://www.notebookforums.com/post2501281-3.html


not enough space in QP part
Quote:
Originally Posted by seaside1982
After reading so many posts, thanks all. I finally get me XP pro work. However, when I change to the QP 2.0 by pushing the sensor DVD/QP. I loaded sucessfully,but give out the following error before the QP menue comes out.
"unable to reserve hiberfile error:c0000"
I updated my fix for that, because you CAN'T assign a drive latter after QPD install completes.
Reply
Reply
post #609 of 910
12/10/06 at 9:06am
Hi. I was looking at a Compaq laptop at a store which had Quickplay for Windows, and liked the UI (Especially its simplicity). Unfortunately, I have an Acer Laptop. Is it possible to install the Quickplay Windows Software (Not Direct) on it? If it is, will everything work?
Reply
Reply
post #610 of 910
12/10/06 at 10:08pm
Quote:
Originally Posted by ArcCoyote
I updated my fix for that, because you CAN'T assign a drive latter after QPD install completes.
So is this the updated info?

http://www.notebookforums.com/post2501281-3.html
Reply
Reply
post #611 of 910
12/13/06 at 7:55pm
So I'll be getting an hp notebook soon, it's on order. I was reading up and came across this thread. Glad to see this being done. Let me help out by giving you all some real hosting for these files:

http://ridickulous.net/quickplay/

I have 2.3 in there now, I'll add more if people request it. I have 2 terabytes of bandwidth a month so hopefully you all can't swamp it. Happy downloading.
Reply
Reply
post #612 of 910
12/14/06 at 2:33am
Thread Starter 
Quote:
Originally Posted by modemboy
So I'll be getting an hp notebook soon, it's on order. I was reading up and came across this thread. Glad to see this being done. Let me help out by giving you all some real hosting for these files:

http://ridickulous.net/quickplay/

I have 2.3 in there now, I'll add more if people request it. I have 2 terabytes of bandwidth a month so hopefully you all can't swamp it. Happy downloading.
WoW! That's good. It's been ages since the last time I wrote a message here. I'm really happy this thread is helping people deal with QuickPlay, and I'm happy you are helping with the hosting!
Reply
Reply
post #613 of 910
12/18/06 at 6:43am
Quote:
Originally Posted by modemboy
So I'll be getting an hp notebook soon, it's on order. I was reading up and came across this thread. Glad to see this being done. Let me help out by giving you all some real hosting for these files:

http://ridickulous.net/quickplay/

I have 2.3 in there now, I'll add more if people request it. I have 2 terabytes of bandwidth a month so hopefully you all can't swamp it. Happy downloading.
hi! sorry for my english couse i'm fom russia

i'v been download all parts and when i unrar i'v got error message in part7: CRC failed in 'HPQPDP/data2.cab' File is broken

any ideas?
Reply
Reply
post #614 of 910
12/18/06 at 4:05pm
Quote:
Originally Posted by ilyeah
hi! sorry for my english couse i'm fom russia

i'v been download all parts and when i unrar i'v got error message in part7: CRC failed in 'HPQPDP/data2.cab' File is broken

any ideas?
Same thing happened to me with every source I downloaded from. If someone can get me a good set I will replace them, Sorry...
Reply
Reply
post #615 of 910
12/22/06 at 5:08am
sorry to tell you guys, the quick play 2 is for the new notebooks, i. e if you did have the restore cds for a newer note book say dv8000, or dv9000 series, it would not work be cause it would not detect the newer style quick play button unit, and yes you would have to erease the boot drive, make a 1 GB partion, then the software restore would make the date/os partion and the restore partion., and yes the quick play software is a mini linux install, sorry
Reply
Reply
post #616 of 910
12/25/06 at 8:18pm
Quote:
Originally Posted by ilyeah
hi! sorry for my english couse i'm fom russia

i'v been download all parts and when i unrar i'v got error message in part7: CRC failed in 'HPQPDP/data2.cab' File is broken

any ideas?
too.........

Quote:
! H:\Quickplay 2.3\QP23.part07.rar: Packed data CRC failed in HPQPDP\data4.cab. The volume is corrupt
! H:\Quickplay 2.3\QP23.part08.rar: CRC failed in HPQPDP\data4.cab. The file is corrupt
! H:\Quickplay 2.3\QP23.part09.rar: CRC failed in QPW\data2.cab. The file is corrupt
can you have the better source ?
i'm need it to use for install my dv2107tx
i'm can't download from other like free store hosting like rapid,mega or any because my country are use slot full always


or anyone have ideas to fix this error ?
thanks..........
Reply
Reply
post #617 of 910
12/27/06 at 3:11am
Well let me know if somebody still need this Directorys


C:\SWSetup\HPQPDP (715 MB)
C:\SWSetup\QPW (76.8 MB)

As i can see on my dv2120us. Both refer to Quickplay 2.3 version. Just let me know and i will be happy to rar that stuff and upload it somewhere.

Cheers
Reply
Reply
post #618 of 910
12/27/06 at 4:57pm

QuickPlay please

Quote:
Originally Posted by CyberManiaK
Well let me know if somebody still need this Directorys


C:\SWSetup\HPQPDP (715 MB)
C:\SWSetup\QPW (76.8 MB)

As i can see on my dv2120us. Both refer to Quickplay 2.3 version. Just let me know and i will be happy to rar that stuff and upload it somewhere.

Cheers

Hello Friend,
Can you please upload the those files for me please!!
I dont have any copy of those files..As my C drive was wiped out due to a mistake
Reply
Reply
post #619 of 910
12/27/06 at 8:09pm
Quote:
Originally Posted by rapersonal
Hello Friend,
Can you please upload the those files for me please!!
I dont have any copy of those files..As my C drive was wiped out due to a mistake
Sure I will upload those tonight .. Are 8 files of 96mb each and the last one of 9 mb. I will upload them to megaupload.
Reply
Reply
post #620 of 910
12/28/06 at 1:30am
Thanks a lot!
I would be really glad to complete this
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: HP, Compaq and Voodoo Notebooks