New Posts  All Forums:Forum Nav:

sager 5720(clevo M570) power managment problem

post #1 of 4
5/19/06 at 5:27pm
Thread Starter 
Hi folks,

Im the proud owner of a clevo M570B, it s exactly the same as a sager 5720.
However i m struggling with the speedstep settings of the centrino 2.0 (M760)
on battery mode.

What power scheme i choose under power managent, the cpu remains at the reduced speed of 800Mhz.

What i m trying to reach is the maximum speed from the cpu....
I v tried every scheme i could think of.

Even tried a program: speedswitchxp but this doesnt work either.
The one and only thing that seems to work is to connect the power cord from the AC adapter en when i windows, disconnect it, then i can see in the device manager the maximum speed of 2.0 Ghz.

Perhaps someone here can help me out!!!

Thx in advance!

With regards

Endy - then netherlands
Reply
Reply
post #2 of 4
5/22/06 at 4:25pm
I think you can disable this feature in the BIOS but I wouldn't recommend it. You will put a lot of stress on your battery.
Reply
Reply
post #3 of 4
5/23/06 at 8:57am
Try this:

Notebook Hardware Control...

With This software.. you can control CPU Schemes
Reply
Reply
post #4 of 4
5/28/06 at 5:54pm
Quote:
Originally Posted by Woody87
I think you can disable this feature in the BIOS but I wouldn't recommend it. You will put a lot of stress on your battery.

All that does is lock your PC at 800mhz whether you use battery or AC power.

If you run CPU-Z you will see that the Clevo M570 underclocks the FSB to around about the 80 mark and this is why battery performance is so poor.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home