New Posts  All Forums:Forum Nav:

D900k - 9750 BSOD - hardware conflict

post #1 of 3
8/25/06 at 10:03pm
Thread Starter 
Hi Guys,

I have posted this in another thread, but have decided to create my own...

I have a D900k.

I have been getting a lot of BSOD's after it reboots the error it is getting in the event viewer is either .....\viahdd0 failed to respond after timeout.

and also


\Device\ACPIEC: The embedded controller (EC) hardware didn't respond within the timeout period. This may indicate an error in the EC hardware or firmware, or possibly a poorly designed BIOS which accesses the EC in an unsafe manner. The EC driver will retry the failed transaction if possible.



One thing i have noticed is that the primary Ide controller has a I/O conflict with the mainboard resoures

Input/Output Range 03F6 - 03F6 used by:
Motherboard resources

I cant seem to fix it, I have reinstalled iwndows and installled the drivers on the CD (via, ide, etc..) and the conflict is still there, I have downloaded the newest drivers from viaarena and it is still there, even tried removing both devices that hav the conflict in safemode and roobting, but it is still there,

It is really starting to frustrate me...

Any one have any ideas??

Does anyone have the latest BIOS for the D900k?

Im not sure what else to do, i have RMA'd it once but they said they couldnt find a problem...

I have had the HDD, Vid and ram replaced..




Dean
Reply
Reply
post #2 of 3
8/31/06 at 11:56am
Thread Starter 
bump

Can anyone check there ide controllers (all of them)
and see if they have any conflicts....

The place i got it from said that all of them have it....

I dont really believe this....


Dean
Reply
Reply
post #3 of 3
9/12/06 at 11:48pm
Thread Starter 
Hi Guys,

Has anyone had a chance to see there is a conflict with there IDE controller??

Thanks
Dean
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home