NotebookForums.com › Forums › NVIDIA ForceWare & NBF MobileForce Drivers › NBF MobileForce Drivers › XTreme-G MobileForce TRIO RELEASED!!!
New Posts  All Forums:Forum Nav:

XTreme-G MobileForce TRIO RELEASED!!! - Page 2

post #21 of 40
9/1/06 at 9:41pm
Also wondering if these work with the FX2500...
Reply
Reply
post #22 of 40
9/2/06 at 7:42pm
Thread Starter 
I don't see why not...


NVIDIA_G71.DEV_029A.1 = "NVIDIA Quadro FX 2500M XG MobileForce Enhanced"
Reply
Reply
post #23 of 40
9/3/06 at 3:41am
Alrighty. I'll try it then. What do I do if it screws up..? heh
Reply
Reply
post #24 of 40
9/3/06 at 5:05am
Quote:
Originally Posted by debaucher
Ok, I just tried these three drivers and some others listed on your site and EVERY single one gives me a "nvsvc.exe" error on shutdown.

Under services, change the 'NVIDIA Display Driver Service' to Manual or Disabled. Reboot then no more errors
Reply
Reply
post #25 of 40
9/3/06 at 6:06am
Thread Starter 
Quote:
Originally Posted by PSYCHO
Under services, change the 'NVIDIA Display Driver Service' to Manual or Disabled. Reboot then no more errors

The service is essentially useless and from what I hear is for internal NVIDIA debugging only, and is not even needed. I have no clue why it's even included, let alone automatically enabled...
Reply
Reply
post #26 of 40
9/3/06 at 6:27am
Anyone try these drivers on a 2500M yet, an if so how is it working out.
Reply
Reply
post #27 of 40
9/3/06 at 8:22pm
Quote:
Originally Posted by Mdubz
Alrighty. I'll try it then. What do I do if it screws up..? heh
Make sure you make a restore point first, then go back to the point that worked.
Reply
Reply
post #28 of 40
9/4/06 at 8:54am
Vesuvan,

I am currently using the 91.47 drivers and so far they are working like a charm with no problems.
Reply
Reply
post #29 of 40
9/4/06 at 1:07pm
Quote:
Originally Posted by GeForceTony
The service is essentially useless and from what I hear is for internal NVIDIA debugging only, and is not even needed. I have no clue why it's even included, let alone automatically enabled...

Doesn't it control Powermizer? Disabling means that it won't automatically switch down to max power savings level when you unplug. Does it not?
Reply
Reply
post #30 of 40
9/4/06 at 5:48pm
Good luck on the shutdown of LCD when lid closes! i hope youll find the answer soon tony
Reply
Reply
post #31 of 40
9/6/06 at 10:52am
Quote:
Originally Posted by PSYCHO
Under services, change the 'NVIDIA Display Driver Service' to Manual or Disabled. Reboot then no more errors

Thanks for that handy bit of info dude!

Reply
Reply
post #32 of 40
9/6/06 at 8:32pm
I'm using the 91.47 driver and am having a HELL of a time getting the proper resolution on my external LCD:

Samsung SyncMaster 203B connected via DVI Optimum resolution is 1400 X 1050 at 60 Hz.

Any ideas or suggestions?
Reply
Reply
post #33 of 40
9/6/06 at 9:35pm
Never mind, I switched to the Dell 7900 GS driver and all is well. This Sam 203b is only a loaner while my Sony 21" tube is repaired so I can live with the dell driver for now. I do know that I will be careful when I get a flat panel to replace my tube to get a more normal res instead of 1400x1050! I think I'll go 1600 x 1200 if I can!
Reply
Reply
post #34 of 40
9/6/06 at 11:59pm
Well, I tried the 91.47's and found a slight performance decrease on my machine. I lost 100 points in 3dMark06, even over the course of multiple tests. So I am back to the 91.37's, which are picture perfect for me. Great job Tony, keep up the great work! Looking forward to a working LCD lid driver eventually!
Reply
Reply
post #35 of 40
9/7/06 at 2:04pm
How are the performance of these drivers compared with the dell 84.69? I tried the 91.31, but I lost 150 points in 3Dmark06 and oblivion became slightly slower, are any of the trio better for 7900GS than the 84.69?
Reply
Reply
post #36 of 40
9/11/06 at 4:00am
Quote:
Originally Posted by GeForceTony
The service is essentially useless and from what I hear is for internal NVIDIA debugging only, and is not even needed. I have no clue why it's even included, let alone automatically enabled...


Doesn't it control Powermizer? Disabling means that it won't automatically switch down to max power savings level when you unplug. Does it not?

-----------------------------------------------------------------------

Is this true? or is the service useless? final question...how is the performance on 91.47 and which driver are you using/prefer?

thanks in advance
Reply
Reply
post #37 of 40
9/11/06 at 10:25am
does anybody have overlay problems with 91.47 under windows media player, i sem to be having this trouble with wmp11
Reply
Reply
post #38 of 40
9/12/06 at 2:44am
...bumpity bump....
Reply
Reply
post #39 of 40
9/14/06 at 4:12am
My experience aka how i spent my night shift.

XTreme-G MobileForce 91.45-v2.50e - wouldnt install on my machine
XTreme-G MobileForce 91.47-v2.50e - performed about 150 worse points on 3dmark05 then the official nvidia 84.63's but i like the order they laid out the options in in the old style tab.
Reply
Reply
post #40 of 40
9/24/06 at 9:38pm
will these work on a desktop 7900 GS?
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NBF MobileForce Drivers
NotebookForums.com › Forums › NVIDIA ForceWare & NBF MobileForce Drivers › NBF MobileForce Drivers › XTreme-G MobileForce TRIO RELEASED!!!