Probably a really dumb question considering I have read this thread from start to finish about 3 times, but please bear with me on this.
Dell are replacing my burnt out 9100 with a 9400 with the core 2 duo and the 7900gs.
Now, I'm aware Dell have a tendency to underclock their cards and when I came across this I thought it would be the best solution to get the most from the system they're sending me.
BUT, what I can't seem to get into my thick skull, is whether or not I still have to change voltages on the rom to 1v for 2d 1.24v for 3d. I'd planned on using the 600c800, and I notice in NiBiTor that the settings are already 1v, 1v, and 1.24v. So i'm assuming I could get away with just flashing the bios and not worrying about it, is that correct?
I realise that my battery life will be shorter, and the card will probably run a little hotter, but is it really going to run a lot hotter for me to need l8kfanui, or could I get away without using it, without killing my card?
Please help, I'm tearing my hair out with this, and I don't have much of that to start with.