NotebookForums.com › Forums › General Notebook Discussions › Notebook Guides › Unlocked Nvidia-Dell Video BIOS! Overclock your 17inch notebook Videocards!
New Posts  All Forums:Forum Nav:

Unlocked Nvidia-Dell Video BIOS! Overclock your 17inch notebook Videocards! - Page 70

post #1381 of 1404
12/11/08 at 1:32pm
625/825 is a good OC I suppose. The safe frequencies are 600/800 however.
Reply
Reply
post #1382 of 1404
12/15/08 at 9:35am
Hey guys. I happen to have a big overclocking question for the 7950 go gtx. I'm planning on opening the whole m1710 up tommorow and replacing the t7600 with a g one, along with AS5ing the crap outta stuff and putting in two new fans.
MY questions are (GC oriented);
What can I do about the Video Card Ram Chips? They definately get steaming. Is it safe to apply AS5 to them? Can I add extra to make up for the thickness of any thermal pads I find? Should I leave the thermal pads on? Use them in conjunction with the AS5? Or forget even taking the video card out all together? (This is to achieve lower temps with the new fans I have and higher clock rates now that my cpu will be able to process more fps to the video card to compose.)
and Second
Would there be anything else I could do to lower the temps of the ram? (such as a fan blowing inside, etc. anything creative if it turns out that taking the card apart isn't that wise after all.).
And finally, where would one buy thermal pads anyways? I can't seem to find them anywhere really accessible.

Thanks for your help mates. I really do.
appreciate it.
Reply
Reply
post #1383 of 1404
1/1/09 at 9:41pm
Hello, i have a terrible problem with my GPU. I Have a dell E1705, 7900GS 256mb with modded bios but i don't overclock my GPU. When I'm watching a movie or video the GPU temp gets to 92 ºC
. I8KFANGUI tells me the GPU Fan RPM is 0, so the fan doesn't work. Now The normal temp of my GPU is 69 degrees, and i'm scare about that.
what can i do? change the fans? change the drivers?
Reply
Reply
post #1384 of 1404
1/3/09 at 2:48am
I'd take it apart and clean the heatsink assemblies from dust and then if your fan/fans dont work then i would get a replacement asap.
Reply
Reply
post #1385 of 1404
1/7/09 at 1:52am
I hope this is in the right place, since my card is unlocked and all.
I decided to go ahead and completely rip apart my m1710. Problem is, right now I'm at the 7950 go gtx, and I have no freaking clue what kind of bit I need. It looks like a torx bit, but the smallest one I have is just shy of fitting (too large) any ideas what kind it is? I'm kinda stuck without it. Thanks a billion!
Reply
Reply
post #1386 of 1404
1/7/09 at 3:57am
What do you want to do? take the heatsink assembly to bits?
Reply
Reply
post #1387 of 1404
1/7/09 at 9:16am
Well. I'm having a very strange issue now.
I don't know if this is the right spot again...but I put everything back together, powered on the laptop with a new T7600G cpu in it. And well, there are issues.

Whenever I run anything the slightest bit cpu intensive, the temperature jumps from 45C to 95C in less than one second. That's right.

It's obviously an illusion since it's impossible to get that hot that fast. AND I put AS5 on it.

I think that it's a driver or possibly motherboard issue. If it were the cpu wouldn't it not even boot? Anyways, input appreciated.
Reply
Reply
post #1388 of 1404
1/7/09 at 5:11pm
Quote:
Originally Posted by matchbox2022 View Post
Well. I'm having a very strange issue now.
I don't know if this is the right spot again...but I put everything back together, powered on the laptop with a new T7600G cpu in it. And well, there are issues.

Whenever I run anything the slightest bit cpu intensive, the temperature jumps from 45C to 95C in less than one second. That's right.

It's obviously an illusion since it's impossible to get that hot that fast. AND I put AS5 on it.

I think that it's a driver or possibly motherboard issue. If it were the cpu wouldn't it not even boot? Anyways, input appreciated.

Its possible if the cpu is not making proper contact with the heatsink, i guess you have double checked it all.
Reply
Reply
post #1389 of 1404
1/10/09 at 7:39pm
Quote:
Originally Posted by matchbox2022 View Post
I hope this is in the right place, since my card is unlocked and all.
I decided to go ahead and completely rip apart my m1710. Problem is, right now I'm at the 7950 go gtx, and I have no freaking clue what kind of bit I need. It looks like a torx bit, but the smallest one I have is just shy of fitting (too large) any ideas what kind it is? I'm kinda stuck without it. Thanks a billion!

The Torx bits for all of Dell's GPUs are the same as far as I know. You will need either T8 or T9 Torx to fit in there (T8 preferably I think).

Oh and for your CPU problem, see if it does the same thing on battery power.
Reply
Reply
post #1390 of 1404
1/10/09 at 7:48pm
Fixed it. I forgot to replug in the fan. Don't know why that would cause the temp to jump like it did, but it's quite a bit more controlled now. Thanks for the Torx tip!
Reply
Reply
post #1391 of 1404
7/8/09 at 5:10am
how hard is this to do?
Reply
Reply
post #1392 of 1404
7/20/09 at 11:40pm
Maybe this is the wrong place to ask this...but what the hell is the white almost-DVI 24 pin and a slot port on the back of my Geforce 7900 GS go? It doesn't have the four pins around the slot, so it isn't genuine DVI. Where do I find the correct cord for this?
Reply
Reply
post #1393 of 1404
8/24/09 at 4:30pm

Where are these OC guides?

Quote:
Originally Posted by zyb View Post
ok, So I have release the OC guides and bench mark from all cards from the 7800 and up. With all them I have start the same type of warnings about OC'ing. I could care less if you find my statement disrespectful. All i'm stating is the truth. As for juanlu making thing easier for me not really (for others for sure). As I said and Good work. I said nothing to disrespect juanlu work. Zyb
Where are these OC guides? I need to unlock the Go 7800 GS -My system is the Dell E1705 Mboard: MP061 chipset i945PM rev. 03 CPUZ: http://valid.canardpc.com/show_oc.php?id=671979
Reply
Reply
post #1394 of 1404
9/15/09 at 11:31pm
So Matt, I wonder if this card is the card that you ended up killing and then sold to me as a barely used, like new card that arrived DOA. You might think that you got away with stealing my $135 by sending me a dead card, but this is NOT over.
Quote:
Originally Posted by KSMB View Post
is it safe to have the memory at 800....??? (i mean, does it mather if i have it on 700 instaed of 800 ???) its the core you should be carefull to overclock to much yes.. (i just double check here) i use 1.24 volt...OC at 600/800 (or 550/800 often) i think i remember that someone told me that the memory is no problems to oc to highest point (800)...correct ??? <a target='_blank' title='ImageShack - Image And Video Hosting' href='http://imageshack.us/'><img src='http://img385.imageshack.us/img385/5416/namnlssk3.jpg' border='0'/></a>
Reply
Reply
post #1395 of 1404
5/15/10 at 6:26am
um. did someone try replying here? I got a notification but it looks like shat all has happened.
Reply
Reply
post #1396 of 1404
5/15/10 at 6:34pm
Post was deleted due to spam

cheers ...
Reply
Reply
post #1397 of 1404
4/20/11 at 12:27pm
Quote:
Originally Posted by Acclimated View Post

So Matt,

I wonder if this card is the card that you ended up killing and then sold to me as a barely used, like new card that arrived DOA. You might think that you got away with stealing my $135 by sending me a dead card, but this is NOT over.


Code:







Ok weirdo! Actually I still have this card in my laptop as I am typing right now.
					

												
Reply
					

									

												
Reply
					
				

			

		

			


		

				

							
									

													post #1398 of 1404
											

										

									4/20/11 at 12:44pm											

				


				

			

				

			


	

		

		

		
	




					

						
Only two years late. Better late than never I suppose.
					

												
Reply
					

									

												
Reply
					
				

			

		

			


		

				

							
									

													post #1399 of 1404
											

										

									4/28/11 at 7:41pm											

				


				

			

				

			


	

		

		

		
	




					

						
BTW i dont understand this bios at all. I can oc my gtx7950 625 / 759 as is... So what we talking about here?


BTW what are those 7900 GTX w/ XTreme-G Drivers someone has on here? Am using old last nvidias ones for my gtx 7950...
					

												
Reply
					

									

												
Reply
					
				

			

		

			


		

				

							
									

													post #1400 of 1404
											

										

									12/22/11 at 6:38pm											

				


				

			

				

			


	

		

		

		
	




					

						
lol, better later than never ;]


i tried to OC with soft, but i could only do that on tweaked drivers with custom inf, got weird artifacts and screen flicker


so i flashed my 7900gs with 790gsuov.rom (mem optimized and unlocked), pretty easy, no problems


i will overclock it soon so i will update with results but for now, i noticed a 7* celsius temp drop, which is rly weird


anyway, gj juan, gj guys, thanks for help


 


btw: i tried to flash 7900gs with 7900gtx bios, i got gpu mismatch and biod mismatch errors and couldnt proceed,


if anyone knows a method to jump over this pls lemme know.


					

												
Reply
					

									

												
Reply
					
				

			

		

			


	







		






		
New Posts  All Forums:Forum Nav:

	

		

			  Return Home		

		

			  Back to Forum: Notebook Guides		


		
	

	



















					

										

					


						
												
NotebookForums.com › Forums › General Notebook Discussions › Notebook Guides › Unlocked Nvidia-Dell Video BIOS! Overclock your 17inch notebook Videocards!