NotebookForums.com › Forums › General Notebook Discussions › Notebook Guides › Unlocked Nvidia-Dell Video BIOS! Overclock your 17inch notebook Videocards!
New Posts  All Forums:Forum Nav:

Unlocked Nvidia-Dell Video BIOS! Overclock your 17inch notebook Videocards! - Page 8

post #141 of 1404
12/26/06 at 2:26pm
Quote:
Originally Posted by pdonket
*falls asleep* so much reading lol

Wake up d00d, there's a hackin ta be dunn!
Reply
Reply
post #142 of 1404
12/26/06 at 2:29pm
Quote:
Originally Posted by rnbguy
so with my 7900GS im running the 7900GSX bios on 600/800 is that my best option performance wise?
That depends on whether or not you want the ability to change the clockspeeds via software. If you flash your card with his unlocked and unoptimized GTX BIOS, then use coolbits to set the clocks to 600/800 there will be no performance difference between the GSX and the new settings. (other than you can change speeds on the fly...)
Reply
Reply
post #143 of 1404
12/26/06 at 2:36pm
And if you would choose a too low voltage in 2D-mode... what happens then ?
Well I think I`ll stay with 1V in 2D-mode
Reply
Reply
post #144 of 1404
12/26/06 at 2:51pm
The lowest voltage option you will have is .8 volts. I have seen a couple guys on here that are successfully using that voltage with no issues. Try it out, you can always flash back if it doesnt work out. As long as you don't try and tamper with the boot clocks, then it will be a reversible fix for you. If you boot into windows and it locks up at the desktop, you know its time to try a little more voltage.
Reply
Reply
post #145 of 1404
12/26/06 at 3:04pm
question, is there any benefit/need to change the voltage of the 7900 GTX?
Reply
Reply
post #146 of 1404
12/26/06 at 3:17pm
Being that the GTX uses the same exact core as the GS, then yes. The real benefit would be cooler running temperatures at full load, which I think is a big bonus. The 2D settings can be voltmodded down a bit also, to perhaps acheive a bit more battery time, and even cooler idle temps.
Reply
Reply
post #147 of 1404
12/26/06 at 4:05pm
please, help, am i doing right.

im following this steps, and on step 4 i type 790GSUOV.ROM. (and the laptop runs at 1.24 volt, ? )

then everything should work ?

is the 1.24 volt flash BEST ? does it got highest temp with that also ?
Reply
Reply
post #148 of 1404
12/26/06 at 5:03pm
Quote:
Originally Posted by yolda
take form the website
VER.2. Solved bug that when AC is unplugged, performance drops down.
If exprience buddys from the forums agree with me i will warn that THIS IS NOT A BUG!!!!!!!!!!
its supposed to be like this to save battery life, so noobs
dont use the bios as your permanent bios, as soons as you are able to make your own, plz make one that suits your batter life needs.

He's right, when on battery my card stays in full power 3d mode so if I play a game on battery (which I do occasionally) I get at least 45 minutes less battery life If it is possible juanlu, could you (or anyone else who has the version without this issue) host it somewhere so people here that use their laptops on battery can use this wonderful mod without losing their battery life.

EDIT:
Never mind, he only unlocked the max performance setting for powermizer on battery if you set it to "balanced" it will work like it should.
Reply
Reply
post #149 of 1404
12/26/06 at 5:37pm
Quote:
He's right, when on battery my card stays in full power 3d mode so if I play a game on battery (which I do occasionally) I get at least 45 minutes less battery life If it is possible juanlu, could you (or anyone else who has the version without this issue) host it somewhere so people here that use their laptops on battery can use this wonderful mod without losing their battery life.
The rom unlocks the clocks so you can change themin windoews, tHTAS great, but then agin the original ver 1 was perfect. Now Noobs will get less battry life. About Krayziepop posts over voltages, i found no evidnce in power drain or WATS using my programs so i cant says its true, but then again i cant say its false.. regarding the timmings, you wont get to 800mhz with the gs bios on a gs card, try it, and you will se it fries or locks up, i would recommend the battery life thing back and maybe some REAL optimiced memory settings. I AM Glad he send me this link now my card runs even better thant before now that i can select profiles and even get higher clocks with some tunning, THNKS AGAIN!
Reply
Reply
post #150 of 1404
12/26/06 at 5:38pm
you guys rock!
Reply
Reply
post #151 of 1404
12/26/06 at 6:06pm
1 more thing, i am still waitong for the PM with the data in (español/english/Deutash) to review it lol i would like to know more.
Reply
Reply
post #152 of 1404
12/26/06 at 6:22pm
And one mor question from me...
Could someone please enlighten me how to add my "self-created" Bios to the CD of juanlu, so that I can boot with this CD ?
Reply
Reply
post #153 of 1404
12/26/06 at 6:26pm
Quote:
Originally Posted by Justageek95
He's right, when on battery my card stays in full power 3d mode so if I play a game on battery (which I do occasionally) I get at least 45 minutes less battery life If it is possible juanlu, could you (or anyone else who has the version without this issue) host it somewhere so people here that use their laptops on battery can use this wonderful mod without losing their battery life.

EDIT:
Never mind, he only unlocked the max performance setting for powermizer on battery if you set it to "balanced" it will work like it should.

Ok What bios have u used?The GS bios with optimized timings and GTX voltage will obviously give you shorter battery life when gaming.

GS original bios stays att 1 V whatever clock u run. Modified GS bios Ups u to 1.24 V when entering 3D mode thus decresing battery life.

Option is to use Mr K-pops rom and keep the Voltage low for 3D.

I agree with Mr K-pop. Lowering Voltage does Work

Currently running

VID 3 = 0.9 V
VID 7 = 1.0 V
VID 4 = 1.1 V

595 / 600 Stable

9100 3Dmarl -05
Reply
Reply
post #154 of 1404
12/26/06 at 8:00pm
Quote:
Originally Posted by Rasken
Ok What bios have u used?The GS bios with optimized timings and GTX voltage will obviously give you shorter battery life when gaming.

GS original bios stays att 1 V whatever clock u run. Modified GS bios Ups u to 1.24 V when entering 3D mode thus decresing battery life.

Option is to use Mr K-pops rom and keep the Voltage low for 3D.

I agree with Mr K-pop. Lowering Voltage does Work

Currently running

VID 3 = 0.9 V
VID 7 = 1.0 V
VID 4 = 1.1 V

595 / 600 Stable

9100 3Dmarl -05

So what bios you use, GS or GTX?
Reply
Reply
post #155 of 1404
12/26/06 at 8:12pm
Thread Starter 
Yolda, tomorrow I will speak with you. I travel and return tomorrow. Sorry..
Reply
Reply
post #156 of 1404
12/26/06 at 8:19pm
Quote:
Ok What bios have u used?The GS bios with optimized timings and GTX voltage will obviously give you shorter battery life when gaming.

GS original bios stays att 1 V whatever clock u run. Modified GS bios Ups u to 1.24 V when entering 3D mode thus decresing battery life.

Option is to use Mr K-pops rom and keep the Voltage low for 3D.

I agree with Mr K-pop. Lowering Voltage does Work

Currently running

VID 3 = 0.9 V
VID 7 = 1.0 V
VID 4 = 1.1 V

595 / 600 Stable

9100 3Dmarl -05

The voltage and clocks arent the issue here, cuz thats UNDER POWR SUPPLY, the entire point of powermizer is to lower clocks, voltgae and god knows what else during battery. again just an adviced i am not the developer of this roms, i find them great for me and others who know how to take advantage of it, but others may not.
Reply
Reply
post #157 of 1404
12/26/06 at 8:28pm
Quote:
Originally Posted by rudrood
So what bios you use, GS or GTX?

I'm using 790GTXUO.ROM but i modified the voltage settings.

The reason to why i belive that voltage actually change as they should is that temperatures of the GPU and the powerbrick decreases with lower VID 4 Voltage settings.

I use 91.52 drivers with modified inf. "HKR,, PowerMizerEnable, %REG_DWORD%, 1"
Reply
Reply
post #158 of 1404
12/26/06 at 8:37pm
Quote:
Originally Posted by yolda
The voltage and clocks arent the issue here, cuz thats UNDER POWR SUPPLY, the entire point of powermizer is to lower clocks, voltgae and god knows what else during battery. again just an adviced i am not the developer of this roms, i find them great for me and others who know how to take advantage of it, but others may not.

Disabeling Powermizer will cause clocks to be at maximum performance all the time thus making the GPU operate at 1.24 V on a normal GTX bios. That is why battery time will differ between GS bios and GTX bios unless u set to maximum power saving on battery. VID voltages Wont change properly unless u have three different VIDs with different voltages.

Am I all wrong or Just lucky beacuse it works for me.
Reply
Reply
post #159 of 1404
12/26/06 at 8:49pm
so explain this to me, juans bios disables powermizer so the batterylife will suck b/c the card will always be runnin at full power. Is there a way to make it NOT disable powermizer/is this the only thing thats effecting batterylife when using this bios?

also can someone explain voltmodding to me as it pertains to the GTX cuz im an idiot
Reply
Reply
post #160 of 1404
12/26/06 at 9:06pm
Even with the GTX powermizer downvolts and downlocks, the difference is timmings, max voltage, and maz clocks. If you report yours working fine thast maybe a driver thing Cool, i might try that then too. But so far i get artifacts i wasnt getting before ... i would like to know what he really change to unlock them so i can make my own room... cuz these gimme artficats (only to me).
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Notebook Guides
NotebookForums.com › Forums › General Notebook Discussions › Notebook Guides › Unlocked Nvidia-Dell Video BIOS! Overclock your 17inch notebook Videocards!