Unlocked Nvidia-Dell Video BIOS! Overclock your 17inch notebook Videocards! - Page 14

Could you explain why you increased the voltage .1v? The card runs pretty hot at stock settings and bumping the core voltage I assume will cause throttling issues due to the temperatures. My card already hits 90 degrees while playing 3d intensive applications. Thanks for your work on this again

lol he is still mad at me and cares BS if someone translates it or not, well thats what his pm said... :/ anyway people, there you have it, how to unlock the bios mannually to create your own roms that will adjust to your own needs. Good luck i might post something else in the future about the pipelines and vschaders, i still have hope.

boysssss

i have a question...

this is pref table editor from 7900gtx for clevo...

22FF0000647CF4010000005802C2000000FFFF000000FFFF00000001FF00000001FF000100FFFF0000 00FFFF00000001FF00000001FF0001


i dangerous modifyed simili a 7900gtx for inspiron??

sorry my english

Finnaly he has made them public, now people rep the guy or send him money!!!! he diserves it, it takes balls to do it, and ofcourse brain. It would be great if he did a new thread form scratch. Juanlu great jon ind rep 4 you! I still disagree with the timmings, i am suresergiop is not using strandard Gs bios lol, well nvm, great job.

rough translation
http://translate.google.com/translat...language_tools

this is a very good explanation of what some of the bios entries do..

Should I be noticing in inrease in my memory OC potential? My OC's before this bios were 550/650, any higher and I artifacted, but I got rivatuner and atitool up and while 560/660 gave me artifacts, 550/700 hasn't yet. Mind you, I'm the idiot who took the thermal pads off of my GPU heatsink

I just want to say thanks. My highest before this bios was ~8k. I just scored 9710 at 650/1600. Compare link here.

yea my core is stable at 550 but rite now my memory is at 750 and I'm not artifacting in atitool...hmmmm

Thanks again
Was just curious because my voltage tab in 3d is listed as 1.28V.
I'll give it a shot and report back what temps i get using this on the XPS GENII with the 6800 ultra.

You are the man! I'm going to give this a try, if it works, rep for you good sir. EDIT: Works flawlessly! Thank you very much!

Hey KManZ, new owner of a 1705 with a 7900gs, read up on all 17 pages. I'm following your post, and was curious if you came up with any better settings than the above shown in your pictures of NiBiTor for a balance between voltages/temps/OC capability? Or does your shown settings work best? I'm using the 790GSUON.ROM rom modified with NiBiTor to the settings you suggested above. Anything else? I'm getting ready to flash if anyone else has any suggestions!! Thanks!! You guys rock!!! - EDIT: Ok, just finished my 3dMark05 with the stock bios:6061 using drivers 8.4.6.9 Going to flash!!!

I can confirm this works fine with out any increased temps.

Thanks for adding the 6800ultra bios so quickly. It's working fine. Rep for you Juan

Same here. I always see a bunch of people saying that when overclocking the Ultra, there is like some giant increase in temps, but I'm getting the same or similar temps. I got 1000 extra 3DMarks just by doing the "Detect Optimal Frequencies".

No sir I do not. I want to clear things up with you juan. I apologize, as I knew I had come across harsh and wrongly. With the holidays, things have been pretty hectic around my place and I misplaced harsh criticism towards you. That was unfair to you and all who have benefitted from your mod. I guess it kinda bugged me that you were initially being so secretive about the whole thing. We have all been very anxious for somebody to come along and start whacking their way through the new BIOS's on these newer cards. Honestly I had no right to critique you for that, and you have a right to be proud of your work. I have been wanting to do what you have done since day one... unfortunately my E1705 is used as my work laptop and if I did somehow screw it up, it would cost me time and money which right now is not a leisure I have to spare. Personally I am glad that someone else took the helm as the lab mouse finally Anyway, as I have said before you are a very welcome addition to these forums and I hope you stick around. Most of us are easy to get along with, including Mr. Yolda . He may sound as though he is coming at you offensively, but really its just his way of getting his own point out. I am sure he has meant no harm by anything he has said here. Well, its my turn now to start some more modding. I have the dremel tool ready, and its time to make the heatsink work a little better than it normally does. Pics will follow sometime later tonight or tomorrow morning. Have fun guys!

have you totaly erase the "old" driver before you install the "new" driver.

had the same problem like you, but it went ok after i did what i said.

use the 1 volt flash, and the temp gets lower.

Yes but the card randomly crashes at 530-611 using 1.28v.
Card works flawlessly at 530-611(1.22ghz) under extensive testing in game using the 1.38v setting without increased heat. Still never goes above 90c

The card will throttle if it gets too hot so unless its throttling dont wory about the temps. Mine throttles the cpu and gpu at 92c.

Ok guys, it worked!! All flashed!!! New 3dMark05 8388, not bad! using same drivers....only prob is the thing gets HOT and the fans don't seem to kick on...seems idle it will get up to 79c...what are the normal ranges and whats pushing it? Oh and the detected optimal OC settings is 518/184 Thanks for all your help!!!