NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Legacy (single-core notebooks) › Notebook Hardware Control readings...
New Posts  All Forums:Forum Nav:

Notebook Hardware Control readings...

post #1 of 4
4/4/07 at 9:30am
Thread Starter 
Using Notebook harware control / NHC

System : XPS M140 / 630M

Pentium M 1.86, 533 FSB, 1gb, 80gb.

6 - 0.732v
8 - 0.828v
10 - 0.908v
12 - 0.988v
13 - 1.020v
14 - 1.084v

@ 100% CPU for 5 minutes until fan kicks off and lowers temp by 3C / 5F :

CPU highest temp : 44C / 112F

HDD highest temp : 36C / 97F


If u think my settings are incorrect or need some tweaking, kindly guide me here !

Cheers !
Reply
Reply
post #2 of 4
4/4/07 at 2:57pm
Since you're the only one that has access to ur computer, it's hard for us to say that something is incorrect, or needs tweaking. Each computer is different, so there's not much we can do as results vary alot.

But if you're happy with the results, and there's not instability issues, then that's all you really need.
Reply
Reply
post #3 of 4
4/4/07 at 5:50pm
Thread Starter 
I do know every machine has its own limitations BUT wht I need to know here is the temperatures of the HDD and the CPU !

Are they too high or OK.... ?
Reply
Reply
post #4 of 4
4/4/07 at 6:30pm
Those are very good temps. Those look more like stock idle temps to me, so if their under full load then thats great.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
NotebookForums.com › Forums › Notebook Manufacturers › Dell Forums › Dell Legacy (single-core notebooks) › Notebook Hardware Control readings...