NotebookForums.com › Forums › Notebook Manufacturers › Acer Notebook Forums › Acer Notebook Reviews › Acer Aspire 1710 Review
New Posts  All Forums:Forum Nav:

Acer Aspire 1710 Review - Page 59

post #1161 of 1526
Quote:
Originally Posted by panther5
35 min for 40GBs. It's the USB2.

I have external Western digital 200GB. 50GBs of data from the internal HDD to the external took me 40-45 minutes ( I don't remember exactly).

I checked about the USB2 speed and it should be 480mbps
Um, USB2 is 480Mb/s on the wire. That doesn't count overhead, O/S
latency, etc., etc. USB drivers typically reserve 10% of the bandwidth
for overhead. If you have audio devices on your USB bus a lot more could
be reserved.

- Eric
post #1162 of 1526
Quote:
Originally Posted by panther5
UPS is that little box that gives stable power supply to your PC.You connect your PC to this machine, and the machine to your home's or work's power supply. So, nomatter how unstable is the power supply of your home, your PC will get stable 220V. They are not very expensive. In my work, the power supply was playing all the time, from 220V to 190V. We had a lot of problems. PSUs burning, motherboards malfunctioning, hard drives, everything.

From the BIOS the light detection is standard ON.
I have it always disabled.
It is a possibility that the light detection has problem and makes the inverter changing all the time the volts of the backlight. I am only guessing. I could be wrong. But if everyone that has LCD problem has this option enabled, and the guys that didn't have the LCD problem had this option disabled, then we could have find the real cause of the problem. Again this is a very theoritical thought and I could be wrong.
"UPS" stands for "Uninterrupible power supply". Generally it's a big battery,
with electonics that convert battery power into output power. The battery
output is (relatively) stable, independent of the input power. The input
power just charges the battery.

Flaky power can indeed cause all sorts of bizarre problems - including
premature death.

- Eric
post #1163 of 1526
Quote:
Originally Posted by panther5
I have to correct my previous post. It wasn't the bios fault for the movies little freezing.
It's something with the divx configurations.

As for the LCD famous problem....
Well, a lot of people had the same problem. But not all of the Aspire owners have this problem. I suppose that means that a specific number of machines made in the same perhaps period have somethink faulty.
For richal, who had two times replaced the inverter, I can think of three reasons:

1) Bad luck. The first time that your inverter broke down, they put inside a faulty inverter.
2) Something else inside the laptop burns the inverter.
3) Perhaps your power supply in your home is not stable enough? Maybe a UPS would help. In the factory that I work, we have a generator that gives the power supply and it's not stable at all. Without UPS, the PSUs of the desktops were burning after 4-6 months. After installing some cheap UPS, we didn't have the same problem again.
Just a couple comments. The inverter board (a little skinny thing) is mounted
right at the bottom of the lid. I've noticed mine runs uncomfortably hot
to the touch all the time. Would you folks check yours? Fold the lid
part way shut and touch the bottom piece on the lid assembly. Mine
consistently runs quite a lot hotter (by touch) than the CPU ever does.

Most failures in electronic parts are due to thermal stress - heating it up,
cooling it down. The greater the temperature range and the more times
you cylce it up and down the sooner the part will fail.

So I tend to leave my stuff on all the time, to minimize thermal cycles. This
may prolong the life of the inverter.

I also have to wonder about a design that 'normally' runs a part that hot,
with no cooling provision.

It doesn't surprise me that they fry.

- Eric
post #1164 of 1526
Quote:
Originally Posted by Xis
I took the fan out today, to clean it, and reatached it carefully so that it would be well placed.
Runned my stress game (AAO) and the results are the same:
CPU:79ºC
GPU:73ºC
HDD:54ºC

The fan is working fine, but i can't understant why the CPU gets so hot... I even bought a termaltake coolpad, but there is no major improvements...
Oh boy, get rid of the thermal pad.

The contact between the heat sink and the CPU is critical for good cooling.
The "grease" you use makes a BIG difference.

The best one to use is Artic Silver (not any other "silver" product - many
of them do NOT contain sufficent silver).
post #1165 of 1526
Quote:
Originally Posted by alex3299
Try to press FN+F9, because you don´t need any software to make the buttons work..
Yes, you do. You need to install the drivers for these from the Acer site.
I don't remember exactly where I got them (I keep copies on my hd).
If you can't find them post again and I'll dig them up.

- Eric
post #1166 of 1526
Quote:
Originally Posted by Eric_Theis
Oh boy, get rid of the thermal pad.

The contact between the heat sink and the CPU is critical for good cooling.
The "grease" you use makes a BIG difference.

The best one to use is Artic Silver (not any other "silver" product - many
of them do NOT contain sufficent silver).
I already had ordered the Artic Silver 5 (classified as the best). I'm just waiting for it to arrive.

As for the green bars question, anyone knows anything?
post #1167 of 1526
Quote:
Originally Posted by Eric_Theis
Just a couple comments. The inverter board (a little skinny thing) is mounted
right at the bottom of the lid. I've noticed mine runs uncomfortably hot
to the touch all the time. Would you folks check yours? Fold the lid
part way shut and touch the bottom piece on the lid assembly. Mine
consistently runs quite a lot hotter (by touch) than the CPU ever does.

Most failures in electronic parts are due to thermal stress - heating it up,
cooling it down. The greater the temperature range and the more times
you cylce it up and down the sooner the part will fail.

So I tend to leave my stuff on all the time, to minimize thermal cycles. This
may prolong the life of the inverter.

I also have to wonder about a design that 'normally' runs a part that hot,
with no cooling provision.

It doesn't surprise me that they fry.

- Eric
Yes, my one gets very hot too. I burn my finger when I press it against the screw (metal being a much better heat conductor than the plastic).
post #1168 of 1526
Quote:
Originally Posted by Xis
The FN+F9 works, but doesn't display the green message on the screen either, meaning that the sound bars don't apear also...
Xis,

Try loading the Realtek Semiconductor Corp. AC'97 Sound System Software (Ver. A3.53) http://support.acer-euro.com/drivers...k/as_1710.html - I think it worked for me.

Regards
post #1169 of 1526
One questions guys: Is the CPU in this a socket 478?
post #1170 of 1526
Quote:
Originally Posted by Eric_Theis
Just a couple comments. The inverter board (a little skinny thing) is mounted
right at the bottom of the lid. I've noticed mine runs uncomfortably hot
to the touch all the time. Would you folks check yours? Fold the lid
part way shut and touch the bottom piece on the lid assembly. Mine
consistently runs quite a lot hotter (by touch) than the CPU ever does.

Most failures in electronic parts are due to thermal stress - heating it up,
cooling it down. The greater the temperature range and the more times
you cylce it up and down the sooner the part will fail.

So I tend to leave my stuff on all the time, to minimize thermal cycles. This
may prolong the life of the inverter.

I also have to wonder about a design that 'normally' runs a part that hot,
with no cooling provision.

It doesn't surprise me that they fry.

- Eric

Yes, my inverter board also gets very hot. I noticed that from the first day I got my 1714.
And I agree that the thermal cycles can reduce a lot the life expectancy of the part, so I have it on all the time.

But it's not only the thermal cycles. Whenever you turn on your machine, for a few microsecs very strong electric current ( some tenths of Ampere) pass through your machine. That also reduces the life expectancy of the machine, but that is a common rule for every electrical device.

Also the light detection that I mentioned in previous post, is the AUTO DIM. I have it always disabled.
post #1171 of 1526
Quote:
Originally Posted by pingu
One questions guys: Is the CPU in this a socket 478?
Yes, the Acer Aspire 1710 uses Socket 478 processors.
post #1172 of 1526
[Also the light detection that I mentioned in previous post, is the AUTO DIM. I have it always disabled.[/quote]

This Light setting in the BIOS everyone keeps mentioning only deals with the machine if it is on battery. In other words, if you are plugged in and pull the cord, then the machine will dim the LCD with this option to YES; otherwise, it will keep it on full brightness even on battery power if set to NO.

Therefore, if you want to extend battery life slightly and don't mind the slighly reduced brightness of the LCD, then you should leave this at the default setting: YES.
post #1173 of 1526

!71x's for sale on Ebay

Three for sale right now $850-$1300.

FYI

- Eric
post #1174 of 1526
Thanks for the information. My inverter board gets also very hot. Do you know of any way to reduce the temperature in that tricky part? I do not want to replace the inverter again in the next months.


Quote:
Originally Posted by panther5
Yes, my inverter board also gets very hot. I noticed that from the first day I got my 1714.
And I agree that the thermal cycles can reduce a lot the life expectancy of the part, so I have it on all the time.

But it's not only the thermal cycles. Whenever you turn on your machine, for a few microsecs very strong electric current ( some tenths of Ampere) pass through your machine. That also reduces the life expectancy of the machine, but that is a common rule for every electrical device.

Also the light detection that I mentioned in previous post, is the AUTO DIM. I have it always disabled.
post #1175 of 1526
Looks like my screen's going the same way as others ....
Getting darker at the top and getting a buzzing from just below the screen
post #1176 of 1526

Overheating Problems

Hello guys, I'v read on this forum more than a few posts saying that they had some problems with the Acer Aspire 1712 model laptop having some sort of heating problem.
I am one of the many that will join the club. My problem is not monitor related like most but my computer overheats for some strange reason...

My problem is the following: my Aspire 1710 (says so on the PC but it should be a 1712) powers off at randomn times during the use of any gaming software.

After some time I figured that it could be a heating problem since the computer powers off instead of rebooting like it it had encountered a blue screen of death.
In my case no blue screen or any other "abnormalities" come up, it just turns off.

I have downloaded SpeedFan, a simple program that detects heat in the HDD and CPU (i think... it says TEMP 1 instead of CPU temp) zone.
My CPU temp when the computer is at rest is of 60 C but it rises to 70 C when I start to open web brousing software and other programs such as eMule.
If I try to play any game, after some 10 or 20 min the temperature rises to around 80C. If I keep playing the computer will eventually power off.

All of the fans seem to work fine and they are rid of any major dust formations. (there is still a little bit of dust, but it's only small small pieces on the fan blades)

It is very strange because this problem just happened from one day to the other. The only thing that I have done to my pc was connecting to windows update and downloading some security updates.
The day after that it started to have these problems.

I was wondering if anybody has had anything similar happen and if there was anything you guys could think of that would cause this problem.

By the way, can somebody post their "normal" temperatures for this laptop, at "rest" (without basically doing anything with the pc) and "under stress" (using games or other programs that have igh usage of the cpu) please!

Thanks!
post #1177 of 1526
by the way... my GPU at rest is at 54C -55C which is 10 degrees over the ones that I have seen posted here...
post #1178 of 1526
Quote:
Originally Posted by ZeroJoJo
By the way, can somebody post their "normal" temperatures for this laptop, at "rest" (without basically doing anything with the pc) and "under stress" (using games or other programs that have igh usage of the cpu) please!
Just dig it up , i post more than enough about my temp's.
post #1179 of 1526
ZZTOP77 u posted on page 70 the following:

"Temp on CPU after few h using 36-42C
Temp on HDD 40-55C ,,,,, after few gigs file transfer up to 61C
Temp on GPU 45-50C ,,,,, after heavy gaming up to 75C"

are these the temps you normally get? Also, did you do some modifications to your computer, such as using Artic Silver thermal paste?

Just for compairesons can you tell me your base specs (CPU, ram, etc) please.


BTW I have a Pentium 4, 3.4 Ghz, 1 Gb of Ram, 120 Gb HDD, Geforce 5700 128mb ram.

Probably my fan is broken somehow... even if it runs, because i get CPU temps that are much higher (60-70C when after a few hours of doing nearly nothing).
post #1180 of 1526

Heh

Quote:
Originally Posted by ZeroJoJo
ZZTOP77 u posted on page 70 the following:

are these the temps you normally get? Also, did you do some modifications to your computer, such as using Artic Silver thermal paste?

Just for compairesons can you tell me your base specs (CPU, ram, etc) please.
See ? dig some more

I did use Cooler master kit . I pull of my CPU by accident within clean up the dust & then i was running from store to store & it was the best what i find in that time , if they have , i will get Artic silver 5

Temp :
web browsing : CPU 37 - 41C , HDD 50-54C , GPU 46-49 C
Gaming , hard using : CPU up to 54C ( never saw over 55C ) , HDD up to 56C ( never saw over 59C ) GPU up to 76C ( never saw over 80C )

Just for compairesons can you tell me your base specs (CPU, ram, etc) please.

Maybe you run a lot red lights too, if you can't see red text
Sorry brother for that loud , but i can't help my self

BTW it looks like you have 1714 , not 1712 , you got faster CPU ( & warmer ) & later DVD±RW & that's it
------------------------------------------------------------------
add some pic
That pic is @ 30sec. updates ,(on new HDD) its about 11H running ,i did web browsing ,gaming ,files transfer ,all kinds bench tests .Its all in one
I did change my HDD last week , so my HDD temp raise a bit , but new HDD is faster & thats why i got it

LL
LL
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Acer Notebook Reviews
NotebookForums.com › Forums › Notebook Manufacturers › Acer Notebook Forums › Acer Notebook Reviews › Acer Aspire 1710 Review