FS/FT Shuttle XPC systems Complete and New

I have a few Shuttle XPC systems left and am offering them out. Im asking 400 plus shipping per unit. These are brand new in the box, complete, and ready to run.

Shuttle XPC SD30G2B unit
http://us.shuttle.com/barebone/Models/sd30g2b.html
Intel E2140 Core2Duo (1.6ghz)
1gb pc2 667mhz (1 stick)
80gb WD SATA drive
LiteOn CD/DVD combo drive
Nvidia 7300gs 256mb PCIe video card
Window XP Pro w/ restore DVD


350 for these units (i have only 2)
Shuttle XPC SD30G2B unit
http://us.shuttle.com/barebone/Models/sd30g2b.html
Intel Pentium 4D (dual core) (3.0ghz)
1gb pc2 667mhz (2 sticks)
80gb WD SATA drive
LiteOn CD/DVD combo drive
Nvidia 7100gs 256mb PCIe video card
Window XP Pro w/ restore DVD

Both of these units run Vista Ultimate just fine. Let me know if you have any additional questions.
Heatware is under Asspenny.

bump

Yep, there is room for a full size card. One pci and one pcie. It would kill the pci slot because of the cooler size, but who cares.

They have the Intel 945 chipset in it, so i would have to check at its fsb cap. I do know the bios supports overclocking tho.

As these are brand new units, i would prefer not to open them up to pull the card out.

bump

bump

Maybe we can still do that trade. I love getting inventive while trading. ygpm

bump

bump

I have one of my personal ones i can take a picture of if you like.

And yep, im open to trade. Laptops are usually a good bet for me.

Thanks!

Here are the specs from the shuttle link i gave.

FORM FACTORShuttle Form Factor
PROCESSORIntel Core 2 Duo / Intel Pentiun D / Intel Pentium 4 / Celeron D
Support 533/800/1066*MHz FSB
(*Native support)
CHIPSETIntel 945GC + ICH7
MEMORY2 x 240 pin DDR2 DIMM Slots, 1GB per DIMM (Max 2GB)
Dual Channel DDR2 533/667MHz supported
VGAIntel GMA 950 256bit 3D engine with a powerful 400MHz core and DirectX 9 3D hardware acceleration
Dynamic Video Memory Technology(DVMT)3.0 supports up to 224MB of Video memory
AUDIORealrek ALC888
7.1 Channel High Definition audio support Digital S/PDIF In/Out
ETHERNETMarvell 88E8001
IEEE 802.3u 100Base-T specification compliant
10MB/s,100MB/s,1GB/s
Support Wake-On-LAN function
IEEE1394 (FireWire) VIA VT6308
Complise with 1394 OHCI specification revision 1.0
Support 400Mb/s ,200Mb/s , 100Mb/s data transfer rate
STORAGE INTERFACE(1) UltraDMA100 IDE channel Master from ICH7
(2) On-board SATA connector
ONBOARD CONNECTORS(2) SATA connector
(1) ATA100 bus master IDE connector
(1) Floppy connector
(1) ATX main power connector
(1) ATX 12V power connector
(2) 4pin fan connectors
FRONT PANEL(2) USB 2.0 ports
(1) mini IEEE1394
(1) Microphone In
(1) Earphone Out
Power-On button
Reset button
BACK PANEL(1) PCI-E slot
(1) PCI slot
(1) PS/2 keyboard
(1) PS/2 Mouse
(1) Gigabit LAN port
(1) Serial port
(1) D-sub port
(4) USB 2.0 ports
(1) Line-in connector
(1) Front out connector
(1) Side Surround out connector
(1) Rear Surround out connector
(1) Center / Bass connector
(1) IEEE 1394 port
(1) Printer poet perforation
(1) Wireless port perforation
DIMENSIONS300(L)x200(W)x185(H) mm
POWER250W
Dimension:82(W) x 43(H) x 190(D) mm
Input:100- 240V AC
ACCESSORIESXPC User Gudie
XPC CD Driver(32/64bit)
Shuttle Extras CD
I.C.E. Technology CPU heat-pipe
Cable
(1) Floppy cable
(1) IDE CD-ROM cable
(1) SATA cable
(1) Internal USB cable
Other:
Screws
Heaksink compound

Thanks for the referral and it a pleasure to work with you too! Let me know if you need a couple more of these beauties.

bump

bump

bump