New Posts  All Forums:Forum Nav:

ZV6000 Power ON issue

post #1 of 3
Thread Starter 
Hi All

I recently assembled a ZV6000 full feature notebook and everything was going well. I barely used it for a day until I inserted a 2GB SD flash into the side slot and all of a sudden the notebook powered itself off. I then powered it back on and once the os was loaded I reinserted the SD and the same thing happened. I then tried to power it on again to no avail. When I press the power button all I see is a one blink of the power LED. I have literally stripped out every single part and yet still the same thing is happening. I have tried resetting the CMOS by replacing the CMOS battery after 30sec but yet still it fails to boot or power on. What could it be? The SD card works fine in my other laptop. Could it be that I may ahve short cuircuited the Motherboard? Any help would be greatly apprecaited. Thanks
post #2 of 3
Have you tried to leave out the SD card device (remove it from the motherboard), and see if it can start up again?

cheers ...
post #3 of 3
Thread Starter 
I dont think I can as it seems its soldered onto the motherboard
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Notebook Forums - General