New Posts  All Forums:Forum Nav:

Armada M700 - Help Plz - Page 2

post #21 of 73
Thread Starter 
Hi,
Qhn how are you?
post #22 of 73
Thread Starter 
what time there my mean yours local time?
post #23 of 73
I move around

Right now I am GMT-6:00, but next week GMT+1:00 or GMT or ...

How is your notebook coming along?

cheers ...
post #24 of 73
Thread Starter 
I post you msg kindly check it
post #25 of 73
Thread Starter 
My laptop hang after booting with 20 sec what i do know plz guide to right me
post #26 of 73
So you "changed my cMOS cell know and fan is working know but problem is that when I am boot my Laptop it is hang after some sec most 20 sec I am try several time"

Try now swapping your ram modules around. If you have one - change it. If you have 2, remove one and use different slots and see.

You should post your query direct here in the thread in the future.

cheers ...
post #27 of 73
Thread Starter 
I also done it but problem is same.Its possible I used my laptop with direct A.C supply? If yes reply me procedure.
post #28 of 73
It should not make any differences if you use AC or Battery or Both.

I slowly think that your motherboard might be failing. Do you have another CPU to try first?

cheers ...
post #29 of 73
Thread Starter 
I slowly think that your motherboard might be failing. Do you have another CPU to try first?
Kindly explain it.
When I used A.C supply to my laptop with battery or with out battery which is right method?
post #30 of 73
You have a CPU on the board where you applied thermal paste from your previous post. Replace it with a known working CPU.

You can use your notebook with ac and/or battery. There is no right or wrong in this. My personal thoughts.

cheers ...
post #31 of 73
Thread Starter 
But how I will change processor from M.B bcoz it is fixed or soldiering with M.B. I used it A.C supply first I remove battery from bay is it right?
post #32 of 73
Your CPU is not being soldered onto the motherboard. Review the service guide and see.

And yes, pull the battery out when the ac is not being connected.

cheers ...

cheers ...
post #33 of 73
Thread Starter 
When I past it I checked that that processor is upgrade able I confirm you that it is soldiering with M.B.
But I will checked it again in morning becoz here is night 3 A.M know. reply you tomorrow.I remove battery then I connect A.C supply with my laptop. What about it hanging problem I haven't installed ant O.S in my laptop.Becoz It isboot normal then I an installed fresh O.S in it
post #34 of 73
Get some rest. Let us see that you can get into BIOS first before thinking about installing OS.

cheers ...
post #35 of 73
Thread Starter 
thank your good advise to me about rest but until my laptop became proper work it impossible I will get rest becoz I face continues thinking about my laptop problem. I also worry about that why my system hangup? Kindly guide me to right what I can do to solve it.
post #36 of 73
Your comp is not booting into anything at the moment. It is not hang, it is on with power and that is it.

This can be caused by bad ram, bad cpu or bad motherboard.

If you can boot into BIOS, then we can go a bit further.

cheers ...
post #37 of 73
Thread Starter 
On start up screen show me MSG of change memory statue press
'F1" "F2" "F10" for setup when I will press F10 it appear bio screen but halt up or hang up
post #38 of 73
Cool. This is much better than I have in mind through your posts so far.

Try download the latest BIOS version for your comp, and see if you can flash it using floppy drive.

cheers ...
post #39 of 73
Thread Starter 
from where i download bio update
post #40 of 73
http://h20000.www2.hp.com/bizsupport...G_I13660-34997


You better get some rest, taking advantage of me getting something to chow

cheers ...
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: HP, Compaq and Voodoo Notebooks