New Posts  All Forums:Forum Nav:

NP5793 vibration

post #1 of 7
Thread Starter 
I have a 3-month old NP5793 (w. geforce9800m).
Whne it is on a wooden sirface, there is a vibration noise that can be suppressed by either adjusting it's orientation slightly, or pressing down on the plastic surface of the laptop around the keyboard.
It is *very* annoying.
Has anyone else experienced this?
Does anyone think that perhaps something is loose, and have an idea of what could be tightened?
Would this merit a call to cust. support?

Thanks so much for your help.
post #2 of 7
Is it coming from the keyboard? If it is the keyboard you may want to remove it and re-insert it.
post #3 of 7
Is vibration common in this model?
post #4 of 7
^^ Not that I have seen..
post #5 of 7
Thread Starter 
Quote:
Originally Posted by Justin@XoticPC View Post
Is it coming from the keyboard? If it is the keyboard you may want to remove it and re-insert it.
It seems to be below the keyboard, right of the trackpad.
When I press down there, it stops. Its almost as if something is loose, and when the plastic shell bends ever so slightly it comes into contact with a fan.
It drives me insane.
post #6 of 7
If you are comfortable with it you may want to remove the bottom panel and see if you see anything loose. Here is a picture of the inside from the bottom. You will see on the right side of the touchpad on the bottom is the Ram and further right the wireless card.

post #7 of 7
Thread Starter 
Quote:
Originally Posted by Justin@XoticPC View Post
If you are comfortable with it you may want to remove the bottom panel and see if you see anything loose. Here is a picture of the inside from the bottom. You will see on the right side of the touchpad on the bottom is the Ram and further right the wireless card.

Thank you. I am perfectly comfortable doing that, I just dont want to void my sager warranty.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sager & Clevo Notebooks