New Posts  All Forums:Forum Nav:

M17 lid change guide

post #1 of 7
11/23/09 at 8:09am
Thread Starter 
PM me with questions or post here also for suggestion i have a video to but i gotta go to dsl to upload




that is the balck case pretty straight forward



thats on the back its what holds the quick touch panel on you will have to revove it because the quick touch panel holds it in place



right near the middle it will get caught just lift the quick touch buttons enough to pull it off



remove the screw in red not the ones in yellow yet they hold it on



self explanitory





this is what it looks like make sure to remove all the stuff

after you remove all the stuff and set it on the lid remove the 2 screw at the bootom and off comes the lid line up the new one and screw it back in

hinge shot

how the m15x should have been built

Reply
Reply
post #2 of 7
11/23/09 at 10:56am
You did this yourself??? Wow this is an awesome guide!!!
Reply
Reply
post #3 of 7
11/23/09 at 7:51pm
Thread Starter 
yea i did it so that i could have a green m9700 lid
Reply
Reply
post #4 of 7
3/8/10 at 12:16pm
Give some photos of the whole notebook please, if you have any - with the green cover, front, back, side, under angle
Because I have M17 and maybe I'm going to buy grey or green cover.
Thanks.
Reply
Reply
post #5 of 7
3/8/10 at 4:07pm
This was four or five laptops ago for "The Moo"
Reply
Reply
post #6 of 7
3/8/10 at 6:40pm
Quote:
Originally Posted by NWGuru View Post
This was four or five laptops ago for "The Moo"
Yes,....I know...him from notebookreview.com...but maybe he had stored some pictures?!
Reply
Reply
post #7 of 7
5/11/11 at 1:34am

hi moo,

 

appreciate this was a long time ago,

 

but would you be able to tell me where i could find a guide on how to replace the actual hinges on my m9750?

 

I bought a new lid and it requires the entire thing to be reinstalled (I prefer this anyways since the old hinges were tightening up)

 

Thanks

Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home