New Posts  All Forums:Forum Nav:

System recovery faied Compaq CQ61

post #1 of 8
Thread Starter 
Hi, My Compaq Presario CQ61-110SA kept on crashing wiht the blue screen error so yesterday i had some time on my hands so i thought I would do a full system recovery in order to stop this nuisence from happening, however I wish I had read the problems associated with the HP recovery manager first as now I have no OS and a recovery manager that dosn't work.

At the moment I am using the recovry manger pre installed on the hard drive however it gets to installing the drivers, and after about an hour a pop up comes up for about half a second saying a about a driver install or dont install (it looks similair to th etype of pop up on vista when a new program wants to run) however due to it poping up so quickly and then going I cannot see what the actual driver is let alone choose an option, after this it says recovery has failed the error code c:\system.sav\logs\BurnBootwarn.log it states the error was detected during PINIST_BBV , when i opened the log file it seemed all the drivers had succeded but [mini_FBI] resilt failed, I have tried doing the recovery with the wireless button on as I heard this could be the cause but still it didn't work, I have recovery discs that i burned however My laptop wont seem to boot fom disk even though I have changed the BIOS and put harddrive at the bottom and the disc at the top.

Any knowledge and solutions for this problem would be very appreciated

Thankyou in advance
post #2 of 8
Can you boot into BIOS and run a diagnostic to be sure that memory and drive are in top shape?

cheers ...
post #3 of 8
Thread Starter 
yeah I did a hard drive test and it said there were no problems how do I go about chacking the memory?

by the this is the fail file that displays after the recovery fails I wish the popup would stay longer when it asks if i want to install a certain driver as if I had time to click yes it might work .

************************************************
PININST (Mini-FBI) starts at: 14:22:04 Monday, February 01, 2010
************************************************

[RunOnceThese_CMD#1]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV1.CMD"
START=> 14:22:07 Monday, February 01, 2010
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 14:22:44 Monday, February 01, 2010
RESULT=> Command finished in 36 seconds.
>===============================
[RunThese_CMD#1]
LAUNCHED=> "CMD.exe /c cscript.exe /nologo C:\System.sav\Util\TDCTWKs\ChangeVol.vbs>>C:\System.sav\Logs\ChgVolBB.log"
START=> 14:22:47 Monday, February 01, 2010
END=> 14:22:48 Monday, February 01, 2010
RESULT=> Command finished in less than 1 seconds.
>================================
[RunThese_CMD#2]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BTooth.CMD"
START=> 14:22:48 Monday, February 01, 2010
END=> 14:22:49 Monday, February 01, 2010
RESULT=> Command finished in less than 1 seconds.
>=================================
[RunThese_CMD#3]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\NVVideo.CMD"
START=> 14:22:49 Monday, February 01, 2010
END=> 14:22:50 Monday, February 01, 2010
RESULT=> Command finished in less than 1 seconds.
>============================
[RunThese_CMD#4]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\IntelVideo.CMD"
START=> 14:22:50 Monday, February 01, 2010
END=> 14:52:54 Monday, February 01, 2010
RESULT=> WARNING:: Command did not finish in 1800 seconds.
>====================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\Touchpad.CMD"
START=> 14:52:54 Monday, February 01, 2010
END=> 14:53:50 Monday, February 01, 2010
RESULT=> Command finished in 56 seconds.
>=================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\Modem.CMD"
START=> 14:53:50 Monday, February 01, 2010
END=> 14:53:51 Monday, February 01, 2010
RESULT=> Command finished in less than 1 seconds.
>=====================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\CardReader.CMD"
START=> 14:53:51 Monday, February 01, 2010
END=> 14:54:02 Monday, February 01, 2010
RESULT=> Command finished in 11 seconds.
>==================================
[RunThese_CMD#8]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\Audio.CMD"
START=> 14:54:02 Monday, February 01, 2010
END=> 14:55:03 Monday, February 01, 2010
RESULT=> Command finished in 61 seconds.
>======================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\NIC.CMD"
START=> 14:55:03 Monday, February 01, 2010
END=> 14:55:34 Monday, February 01, 2010
RESULT=> Command finished in 31 seconds.
>===================================
[RunThese_CMD#10]
LAUNCHED=> "C:\SWSetup\ESUVT\ESURun.bat"
START=> 14:55:34 Monday, February 01, 2010
END=> 14:55:51 Monday, February 01, 2010
RESULT=> Command finished in 16 seconds.
>=====================================
[RunThese_CMD#11]
LAUNCHED=> "\System.sav\Util\TDC\MCPP\WLAN3.CMD"
START=> 14:55:51 Monday, February 01, 2010
END=> 14:55:52 Monday, February 01, 2010
RESULT=> Command finished in less than 1 seconds.
>=====================================
[RunThese_CMD#12]
LAUNCHED=> "\System.sav\Util\TDC\MCPP\WLAN2.CMD"
START=> 14:55:52 Monday, February 01, 2010
END=> 14:55:53 Monday, February 01, 2010
RESULT=> Command finished in less than 1 seconds.
>=====================================
[RunThese_CMD#13]
LAUNCHED=> "\System.sav\Util\TDC\MCPP\WLAN1.CMD"
START=> 14:55:53 Monday, February 01, 2010
END=> 14:56:24 Monday, February 01, 2010
RESULT=> Command finished in 31 seconds.
>==================================
[RunThese_CMD#14]
LAUNCHED=> "C:\System.sav\util\TDC\MCPP\Drivers\Chipset.CMD"
START=> 14:56:24 Monday, February 01, 2010
END=> 14:57:20 Monday, February 01, 2010
RESULT=> Command finished in 56 seconds.
>======================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 14:57:20 Monday, February 01, 2010
END=> 14:57:21 Monday, February 01, 2010
RESULT=> Command finished in less than 1 seconds.
>======================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\util\CreateRP.CMD"
START=> 14:57:21 Monday, February 01, 2010
END=> 14:57:27 Monday, February 01, 2010
RESULT=> Command finished in 6 seconds.
>======================================
****************************************************
PININST (Mini-FBI) exits at: 14:57:43 Monday, February 01, 2010
****************************************************

[Mini-FBI]
Result=FAILED


[C:\System.sav\Logs\BB\Atheros.log]
Result=PASSED

[C:\System.sav\Logs\BB\Audio.log]
Result=PASSED

[C:\System.sav\Logs\BB\BTooth.log]
Result=PASSED

[C:\System.sav\Logs\BB\CardReader.log]
Result=PASSED

[C:\System.sav\Logs\BB\Chipset.log]
Result=PASSED

[C:\System.sav\Logs\BB\Network.log]
Result=PASSED

[C:\System.sav\Logs\BB\Touchpad.log]
Result=PASSED

[LogFiles]
NumOfLogs=7.

Thanks
post #4 of 8
1) I take it that you follow these instruction:
Quote:
Before performing a system recovery, please ensure the wireless device is turned on by pressing the wireless button on the notebook PC. The wireless LED should be lit.

If a system recovery was performed with wireless off, please perform the following:

. Press the wireless button to turn on the wireless switch.

. Reboot the notebook PC.

. Press F11 to boot from the Recovery Manager.

. Click Next when Welcome to Recovery Manager displays.

. Select No and then click Next when Microsoft System Restore displays.

. Click Yes and then click Next when System Recovery displays.

. Select the appropriate item (backup file or not) and then click Next when Recovery your computer to original factory condition displays.

. Allow the system recovery to complete.
2) The recovery disks could be corrupted.

cheers ...
post #5 of 8

Easy answer

Quote:
Originally Posted by jman1989 View Post
Hi, My Compaq Presario CQ61-110SA kept on crashing wiht the blue screen error so yesterday i had some time on my hands so i thought I would do a full system recovery in order to stop this nuisence from happening, however I wish I had read the problems associated with the HP recovery manager first as now I have no OS and a recovery manager that dosn't work.

At the moment I am using the recovry manger pre installed on the hard drive however it gets to installing the drivers, and after about an hour a pop up comes up for about half a second saying a about a driver install or dont install (it looks similair to th etype of pop up on vista when a new program wants to run) however due to it poping up so quickly and then going I cannot see what the actual driver is let alone choose an option, after this it says recovery has failed the error code c:\system.sav\logs\BurnBootwarn.log it states the error was detected during PINIST_BBV , when i opened the log file it seemed all the drivers had succeded but [mini_FBI] resilt failed, I have tried doing the recovery with the wireless button on as I heard this could be the cause but still it didn't work, I have recovery discs that i burned however My laptop wont seem to boot fom disk even though I have changed the BIOS and put harddrive at the bottom and the disc at the top.

Any knowledge and solutions for this problem would be very appreciated

Thankyou in advance
I also had the same problem after trying to restore...took me days to find the simple answer. When that pop-up comes with details or retry, click NEITHER, just click the little x at the top right corner. The restore will continue from there and when it is finished you can manually install which ever driver is failing. I have verified this on many compaq and hp units and it works great even on a couple where the restore partition had been imaged to a larger HD. In this way I was even able to ghost the restore partition to a larger hard drive and have a fully functioning system complete with restore partition.
I have found that quite often this can be caused due to firmware upgrades installed to hardware during normal upgrades. The older drivers will no longer load preventing their installation. You just close the error window and let it continue. The latest drivers can then be downloaded from HP or Compaq and installed afterward.

Hope this info helps.
post #6 of 8

hi i have tried this so many times but all i get is the blue screen no menu comes up? is there anything else i can try? ive tried most options that are there please help!!

 

thanks x

post #7 of 8
What blue screen error are you getting??? Word for word
post #8 of 8
Did you make the recovery disks for the laptop???
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: HP, Compaq and Voodoo Notebooks